[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [cobalt-users] OT: Cobalt parts...
- Subject: Re: [cobalt-users] OT: Cobalt parts...
- From: Jeff Lasman <jblists@xxxxxxxxxxxxx>
- Date: Wed Jul 10 22:21:00 2002
- Organization: nobaloney.net
- List-id: Mailing list for users to share thoughts on Sun Cobalt products. <cobalt-users.list.cobalt.com>
Paul Wilson wrote:
> Later I read somewhere that on many of the RAQ's they don't use screws to
> secure the drives and that the drives can come loose and back out of their
> mounts during shipping. This is possibly what happened to us. Don't know -
> we didn't open the unit. We replaced ours with a whole new machine.
I don't remember the RaQs and RaQ2s, but on RaQ3 and RaQ4, the drives
are connected to the carrier with four screws and the carrier is
connected to the chassis with four spring mounts and one screw. Seems
pretty secure to me.
We always take the RaQs apart and look at them before putting them into
colo. It's cheapest then <smile>.
Jeff
--
Jeff Lasman <jblists@xxxxxxxxxxxxx>
Linux and Cobalt/Sun/RaQ Consulting
nobaloney.net, P. O. Box 52672, Riverside, CA 92517
voice: +1 909 778-9980 * fax: +1 909 548-9484