Re: [cobalt-users] Raq3 and UPS setup

["Roy A. Urick" <roy.urick@xxxxxxxxxxxxxxxx>]

I had the same problem with my raq4 this week. only difference is after I
would plug the power cable back into the wall, the cobalt apparently wouldnt
see the power return. I'd go back 5 minutes later to find the cobalt had
sent the power down signal to my ups(cyber power 375).

I decided it wasnt worth the hassle and just unplugged the cable. My
building has pretty stable power anyway *knock on wood*,
It would be nice to have it working tho.

----- Original Message -----
From: "David Thurman" <dthurman@xxxxxxxxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, December 19, 2001 10:31 AM
Subject: [cobalt-users] Raq3 and UPS setup


> Hello
> We have 2 Raq3's that we have tried to hook up to our UPS system and it
> doesn't seem to work.
> Here is what we have and did:
> Raq3 is set as master for UPS, using a Back-UPS Pro 650, with the supplied
> serial cable from APC.
> 2nd Raq3 is slave pointing to Raq3 IP
> I configured the servers to the way Cobalt states with the LCD panel.
> I then unplugged the UPS from the wall so it would go to battery mode. The
> Cobalt manual states that the display should show that it is in UPS mode
but
> doesn't.
> Any pointers or tips??
> --
> Thank you,
> David E Thurman
> The Web Presence Group
> 309.676.5688
> dthurman@xxxxxxxxxxxxxxxxxxxx
> http://www.webpresencegroup.net
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>