[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[cobalt-users] Raq3 and UPS setup
- Subject: [cobalt-users] Raq3 and UPS setup
- From: David Thurman <dthurman@xxxxxxxxxxxxxxxxxxxx>
- Date: Wed Dec 19 07:32:01 2001
- List-id: Mailing list for users to share thoughts on Cobalt products. <cobalt-users.list.cobalt.com>
Hello
We have 2 Raq3's that we have tried to hook up to our UPS system and it
doesn't seem to work.
Here is what we have and did:
Raq3 is set as master for UPS, using a Back-UPS Pro 650, with the supplied
serial cable from APC.
2nd Raq3 is slave pointing to Raq3 IP
I configured the servers to the way Cobalt states with the LCD panel.
I then unplugged the UPS from the wall so it would go to battery mode. The
Cobalt manual states that the display should show that it is in UPS mode but
doesn't.
Any pointers or tips??
--
Thank you,
David E Thurman
The Web Presence Group
309.676.5688
dthurman@xxxxxxxxxxxxxxxxxxxx
http://www.webpresencegroup.net