RE: [cobalt-users] post restore blues

["Patrick G." <psgraham@xxxxxxxxx>]

>
> What can be causing my inability to access my raq 3 from a browser;
> telnet or FTP? The only way I can get to it are thru a serial port and a
> null modem cable. The *only* changes I have made are in my hosts.allow.
<snip>
>
> Does anyone have a clue? Am I perhaps hooked up the wrong way? (tried
> switching ends on the serial cable as well as computers) Sig other
> swears I had a cable also going from the cobalt to my hub. To be honest
> I don't remember.
>

Joann,

If all you have connected is the serial cable, then http, ftp, telnet, etc
won't work.
You need to re-attach you network cable between the Raq and the hub, or if
you are
working Raq direct to a computer, use a crossover cable.

Can't see anything in what you sent to indicate any other problems.
Fortunately for
me, my rebuild went flawlesly (but I used the OS-Restore Cobalt sent).

I am sure you will get other replies, the list right now seems extremely
slow!!
(My last post took 4 days to show, this one ??? it is now 1:15 pm 5/25-East
coast time)

Patrick G.

(PS - bcc'd you due to list slowness)