Re: [cobalt-users] RaQ3i freezes

["Audric Leperdi" <aleperdi@xxxxxxxxxxxxx>]

Could be something like the ChiliASP logs filling up your first system
device?
This is what happened to me. Search the archive for the mail thread on that.

Audric

----- Original Message -----
From: "Emilio" <emilio@xxxxxxxxxxxxxxx>
To: "Cobalt Users" <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Monday, May 29, 2000 7:45 PM
Subject: [cobalt-users] RaQ3i freezes


> Hello,
>
> Is anyone aware of a problem with RaQ3i servers freezing?
>
> I have installed a RaQ3i server with the following config:
>
> 500mb ram
> 20 gb disk
> ChiliSoft ASP
>
> After installing out of the box the server and adding it to our
> production network, the server stops responding with no apparent reason,
> although the front leds tell that link is present and transmittion and
> disk are ok.
>
> If you powerdown the server and restart, the server will not come up,
> but if you do a reboot (all through the front panel), the server will
> come back to life.
>
> I have installed all patches at Cobalt's site, but can't figure out what
> can cause this freeze.
>
>
> The order followed to install the server was:
> 1.- Server IP and network config at first boot
> 2.- Server browser final configuration
> 3.- OS and Security patches install
> 4.- ChiliSoft ASP install (working ok)
> 5.- Sit and wait for the server to freeze. It did.
>
>
> Server will work fine for about an hour or two (record is 18 hours) and
> then will freeze again.
>
> I have another RaQ3i, same config and serving 50 domains with no
> problem.
>
> Sounds familiar to someone?
>
> Emilio Saldana
> emilio@xxxxxxxxxxxxxxx
> ADigital Mexico
>
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>