[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re[2]: [cobalt-users] Using a RaQ 2/3 as NS1/NS2 servers
- Subject: Re[2]: [cobalt-users] Using a RaQ 2/3 as NS1/NS2 servers
- From: Mike Fritsch <moley187@xxxxxxxxxxxxx>
- Date: Wed Apr 19 19:46:40 2000
- Organization: Personal
Try http://www.ns-one.net/ they have good prices and seem
reliable.
Mike
<--Previous messages can be found below-->
NJK> I notice Paul already replied, but though I'd add some more.
NJK> Using a RaQ2/3 for DNS alone is a pretty expensive nameserving solution.
NJK> Your best bet is to find an old 486, 32Mb RAM and a >1gb harddisk and a copy
NJK> of RedHat 6.2 (http://www.cheapbytes.com - $1.50 approx) and you're all set!
NJK> No I'm not exageratting. 486 will run DNS just fine. Upto a thousand sites
NJK> or so atleast. At the worst you might have to stick in a bit more RAM
NJK> (unlikely!) Welcome to the world of Linux :-)
NJK> I'm guessing you WANT to use the GUI of the RaQ, but it's a lot more
NJK> configurable (and FASTER once you have more than about 20 domains!) to just
NJK> get a "Bind" book (Jeff - This is your queue to point out that O'Reilly
NJK> book!) and take a quick look. It's pretty simplistic to do the normal stuff
NJK> which I'd imagine is what you want.
NJK> --Neil
NJK> -----Original Message-----
NJK> From: cobalt-users-admin@xxxxxxxxxxxxxxx
NJK> [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of Jim Wurster
NJK> Sent: 19 April 2000 21:01
NJK> To: cobalt-users@xxxxxxxxxxxxxxx
NJK> Subject: [cobalt-users] Using a RaQ 2/3 as NS1/NS2 servers
NJK> I am doing some research for my company. We are considering using the RaQ 2
NJK> or 3 as our Primary and Secondary Name servers. Along with our Customer's
NJK> DNS servers. But I have a few questions that I can't seem to find on the
NJK> website. I hope someone out there can help me.
NJK> *Note they will only be doing DNS, no web or mail.
NJK> 1. Can either of these machines be used as a NS server?
NJK> 2. Which model is recommended and why?
NJK> 3. How many DNS requests can one handle with out getting lagged?
NJK> 4. Average machine takes up how much of the internal harddrive?
NJK> Model I am looking at is the Base RaQ2 machine 16mb of Ram.
NJK> Any comments? Open for suggestions.
NJK> Jim Wurster Desk 312-224-3117
NJK> jwurster@xxxxxxxxxxx Cell 312-296-6617
NJK> http://www.maverix.net
NJK> _______________________________________________
NJK> cobalt-users mailing list
NJK> cobalt-users@xxxxxxxxxxxxxxx
NJK> To Subscribe or Unsubscribe, please go to:
NJK> http://list.cobalt.com/mailman/listinfo/cobalt-users
NJK> _______________________________________________
NJK> cobalt-users mailing list
NJK> cobalt-users@xxxxxxxxxxxxxxx
NJK> To Subscribe or Unsubscribe, please go to:
NJK> http://list.cobalt.com/mailman/listinfo/cobalt-users