[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [cobalt-users] BOOTING PROBLEM ON RAQ3i
- Subject: Re: [cobalt-users] BOOTING PROBLEM ON RAQ3i
- From: Joe D <Joed@xxxxxxxx>
- Date: Sun Mar 5 21:12:52 2000
- Organization: Joes Home on WWW Inc
Hi Matt
this is what i get there: I get nothing if i try to connect after a boot atempt but
if i leave it connected and shut power off and back on this is what i get and then it
just stays locked.
Cobalt Networks - 'We serve it, you surf it'
Firmware version 2.3.0
ROM Build info: Wed Oct 6 15:23:25 PDT 1999 freakshow.cobaltnet.com
System serial number: 3H02AM9460361
Memory found: 512 MB
Initializing I2C bus: done
Scanning PCI bus: done
Initializing IDE: done
IDE 0 master: found
slave: not found
IDE 1 master: not found
slave: not found
Initializing SCSI: done
Initializing ethernet: done
Initializing EEPROMs: done
EEPROM Bank 0: Intel E28F008S5 1MB
EEPROM Bank 1: not installed.
Mounting rom_fs: done
Initializing RTC: done
Press spacebar to enter ROM mode
Booting default method - From disk
First stage kernel: Decompressing - done
Linux version 2.2.12C3 (thockin@freakshow) (gcc version egcs-2.91.66 19990314/Li
nux (egcs-1.1.2 release)) #1 (ROM kernel) Wed Oct 6 15:16:06 PDT 1999
Detected 298813655 Hz processor.
Calibrating delay loop... 596.38 BogoMIPS
Memory: 14424k/16384k available (1080k kernel code, 416k reserved, 400k data, 64
k init)
VFS: Diskquotas version dquot_6.4.0 initialized
Enabling new style K6 write allocation for 16 Mb
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx)
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-583f to device 00:18
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IPv4 over IPv4 tunneling driver
early initialization of device tunl0 is deferred
GRE over IPv4 tunneling driver
early initialization of device gre0 is deferred
NET4: AppleTalk 0.18 for Linux NET4.0
Initializing RT netlink socket
Starting kswapd v 1.2
Cobalt temperature sensor v1.2 enabled
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Keyboard timeout[2]
Keyboard timeout[2]
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
lcd: Cobalt LCD Driver v3.01 by
lcd: Andrew Bose <andrew@xxxxxxxxxxxxx>, Timothy Stonis <tim@xxxxxxxxxxxxx>
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.20
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: 100% native mode on irq 14
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CX20.4A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ALI15X3: Ultra DMA enabled
hda: QUANTUM FIREBALL CX20.4A, 19470MB w/418kB Cache, CHS=39560/16/63, (U)DMA
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
sym53c8xx: at PCI bus 0, device 14, function 0
sym53c8xx: 53c875 detected
sym53c875-0: rev=0x04, base=0xc0000000, io_port=0x1000, irq=12
sym53c875-0: NCR clock is 40218KHz, 40037KHz
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xc0008000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
scsi : detected total.
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
eth0: Invalid EEPROM checksum 0xd696, check settings before activating this devi
ce!
eth0: Intel EtherExpress Pro 10/100 at 0x1100, 00:10:E0:00:B6:C5, IRQ 11.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
eth1: Invalid EEPROM checksum 0xd596, check settings before activating this devi
ce!
eth1: Intel EtherExpress Pro 10/100 at 0x1200, 00:10:E0:00:B6:C4, IRQ 10.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
Partition check:
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Warning: unable to open an initial console.
BOOTLOADER: Mapping in physical locations
BOOTLOADER: load_addr=0xc1804000 ret_data=0xc1a05b70
BOOTLOADER: opening "/boot/vmlinux.gz"
BOOTLOADER: mapping 16M-32M for ride home
BOOTLOADER: disabling interupts
BOOTLOADER: flushing cache
BOOTLOADER: Leap of faith!
Second stage kernel: Decompressing - done
Linux version 2.2.12C3 (thockin@freakshow) (gcc version egcs-2.91.66 19990314/Li
nux (egcs-1.1.2 release)) #1 (ROM kernel) Wed Oct 6 15:16:06 PDT 1999
Detected 298813655 Hz processor.
Calibrating delay loop... 596.38 BogoMIPS
Memory: 517340k/524288k available (1080k kernel code, 416k reserved, 5388k data,
64k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx)
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IPv4 over IPv4 tunneling driver
early initialization of device tunl0 is deferred
GRE over IPv4 tunneling driver
early initialization of device gre0 is deferred
NET4: AppleTalk 0.18 for Linux NET4.0
Initializing RT netlink socket
Starting kswapd v 1.2
Cobalt temperature sensor v1.2 enabled
Serial driver version 4.27 with no serial options enabled
Keyboard timeout[2]
Keyboard timeout[2]
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
lcd: Cobalt LCD Driver v3.01 by
lcd: Andrew Bose <andrew@xxxxxxxxxxxxx>, Timothy Stonis <tim@xxxxxxxxxxxxx>
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.20
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: 100% native mode on irq 14
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CX20.4A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ALI15X3: Ultra DMA enabled
hda: QUANTUM FIREBALL CX20.4A, 19470MB w/418kB Cache, CHS=39560/16/63, (U)DMA
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
sym53c8xx: at PCI bus 0, device 14, function 0
sym53c8xx: 53c875 detected
sym53c875-0: rev=0x04, base=0xc0000000, io_port=0x1000, irq=12
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xc0008000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
scsi : detected total.
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
eth0: Invalid EEPROM checksum 0xd696, check settings before activating this devi
ce!
eth0: Intel EtherExpress Pro 10/100 at 0x1100, 00:10:E0:00:B6:C5, IRQ 11.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
eth1: Invalid EEPROM checksum 0xd596, check settings before activating this devi
ce!
eth1: Intel EtherExpress Pro 10/100 at 0x1200, 00:10:E0:00:B6:C4, IRQ 10.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
Partition check:
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Warning: unable to open an initial console.
Kernel panic: No init found. Try passing init= option to kernel.
this is where it stalls
Joe
Mat Kovach wrote:
> On Sun, Mar 05, 2000 at 04:43:20PM -0800, Jeff Lasman wrote:
> : At 01:33 PM 3/5/00 -0500, you wrote:
> :
> : >Again no results at all other then when booting from ROM it locked on loading
> : >lernal for about an hour before i shut it down.
>
> Hook up to the serial port and see what the log files are saying. It may
> just need a manual fsck. I have seen this a few times when the RaQs have had
> inproper shutdown, specially on heavily loaded systems.
>
> : Sounds like a disastrous hardware failure. Possibly the hard disk.
> :
> : > I have roughly 150 domains on this unit. yes i have a good backup and even a
> : >second raq3i i can rebuild on if i have to... what i am wondering is is
> : >there a
> : >method to reboot it just so i can get rear consile access or remote access
> : >from a
> : >pc on the network so i can go in and see if the HD failed or not and
> : >possibly fix
> : >any corrupted files that may be keeping it from booting.
> :
> : You can move the drive to any other Linux system, mount it, and look at the
> : files.
>
> Yep, that works great, even to just fix the file system and get it working.
>
> --
> Mat Kovach mkovach@xxxxxxxxxxxxxxxxx
> Cleveland Linux User Group http://cleveland.lug.net
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users