[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [cobalt-developers] RAQ3 fails to boot after rom update 1.8
- Subject: Re: [cobalt-developers] RAQ3 fails to boot after rom update 1.8
- From: ftr@xxxxxx
- Date: Thu Jul 5 13:41:02 2001
- List-id: Discussion Forum for developers on Cobalt Networks products <cobalt-developers.list.cobalt.com>
Hello!
Did the same thing, the problem in my end is that the disk do not spin up
fast enought.
I did this:
when booting press space to go to rom command
wait 10 secs
enter reboot
it should find the disk.
-----------------------------------------------------------
Best Regards
NSN AS
Fabian T. Falch
Telephone: +47 22 93 67 10
Telefax: +47 22 93 67 11
Mobile: +47 90 63 38 83
-----------------------------------------------------------
This email may contain NSN confidential and privileged material for
the sole use of the intended recipient. Any review or distribution by
others is strictly prohibited. If you are not the intended recipient
please contact the sender and delete all copies.
"Nick de Kruijk"
<nick@xxxxxxxxxx> To: <cobalt-developers@xxxxxxxxxxxxxxx>
Sent by: cc:
cobalt-developers-admin@list. Subject: [cobalt-developers] RAQ3 fails to boot after rom update 1.8
cobalt.com
05.07.2001 21:40
Please respond to
cobalt-developers
I've installed
ftp://ftp.cobaltnet.com/pub/users/jeffb/rom/RaQ3-ROM-Update-1.8.pkg and I
think this was a wrong idea....
After installing this from the webinterface I had to reboot.
When rebooting, the cobalt network logo appeared and nothing happens.
(Oops?)
Using the console i get this:
Cobalt Networks, Inc. - Connecting the Dots
Firmware version 2.3.25
Current date: Thu Jul 05 18:51:31 UTC 2001
ROM build info: Thu May 11 12:01:47 PDT 2000 freakshow.cobaltnet.com
System serial number: Uninitialized
Memory found: 96 MB
Initializing I2C bus: done
Scanning PCI bus: done
Initializing IDE: done
Initializing SCSI: no SCSI controller installed - failed
Initializing ethernet: 1 ethernet controllers installed - done
Initializing flash: done
Flash Bank 0: AMD AM29F080B 1MB
Flash Bank 1: not installed.
Mounting rom_fs: done
Initializing i18n - language "en": done
Press spacebar to enter ROM mode
Booting default method - From disk
After this nothing happens. The disk-led is on but not flashing or
anything.
After 10 minutes or so I decided to turn the damn thing off.
Did someone ever had this problem? And how can I solve it?
I can get into rom-mode but I don't know what to do there, the test menu is
empty?
Please Help Me!!!!!!!!
Regards,
Nick de Kruijk
Amphora Multimedia
http://www.amphora.nl
-----------------------------------
Amsterdamsestraatweg 243e
3551 CD Utrecht
Tel: 030-2421303
Fax: 030-2420381
_______________________________________________
cobalt-developers mailing list
cobalt-developers@xxxxxxxxxxxxxxx
http://list.cobalt.com/mailman/listinfo/cobalt-developers