RE: [cobalt-developers] RaQ3 UPS Solutions ?

["Lyle Scheer" <lyle@xxxxxxxxxx>]

> [mailto:cobalt-developers-admin@xxxxxxxxxxxxxxx]On Behalf Of Barry
> Titmarsh
> Sent: Wednesday, August 02, 2000 12:46 PM
> Subject: Re: [cobalt-developers] RaQ3 UPS Solutions ?
>
> One problem with the UPS code is that Yes it shuts down the
> raq3 but id the
> power is restored before the UPS batteries give up and die
> the ups comes
> back alive but the raq3 is already down NO way to revive it
> unless you have
> a remote mains power switch between the UPS and the raq3's

The UPS software should shut down the RaQ 3 and then the main power on the
UPS when the battery reaches less than 20%, and should restart when power is
restored.  If this does not happen you should work with support.

> Other wise its works fine. and I did ask if cobalt would
> finish the code
> but the answer was no longer interested.
>
> So like a lot of things cobalt start they rarely finish

Cobalt never planned nor promised a web front end to the UPS software.  As
far as Cobalt is concerned, there is nothing to finish.  I'm not quite sure
where you would need one in any case... it's something you set up when you
are physically with the RaQ 3 (thus the LCD interface) and I'm not sure why
you would reconfigure anything remotely.  It's hard to unplug a UPC from
3000 miles away.

- Lyle