[cobalt-users] Mrtg Config files for raq550

["paul" <paul@xxxxxxxxxxxxxxxxx>]

>there is a cfgmaker cause you have to select your smnp sources, community
>names, interfaces etc...


>my config line is this:


>./cfgmaker --global 'Workdir: /home/.sites/28/site1/web/mrtg' --global
>'Options[_]: bits,growright' --output /home/mrtg/mrtg.cfg ttt@xxxxxxxxxxx 

Many thanks. I've done this with the correct paths for my installation. This
is what I input:


***
./cfgmaker --global 'Workdir: /home/.sites/143/site2/web/mrtg' --global
'Options[_]: bits,growright' --output /home/mrtg/mrtg.cfg
public@xxxxxxxxxxxxx
***

Public is the default standard name for the read only snmp, and the ip is
the ip on my network. For some reason it comes back with:

***
--base: Get Device Info on public@xxxxxxxxxxxxx:
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.168.1.200" [192.168.1.200].161)
                  community: "public"
                 request ID: -11467826
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
 at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 622
SNMPWALK Problem for 1.3.6.1.2.1.1 on public@xxxxxxxxxxxxx::::::v4only
 at ./cfgmaker line 825
WARNING: Skipping public@xxxxxxxxxxxxx: as no info could be retrieved
***

I've just switched snmp on before I ran this. Ok - what silly mistake have I
done????!!

Thanks
Paul