RE: [cobalt-users] Upgrading Raq3 OS to 4/4i/4r?

["Paul Shuttleworth" <paul@xxxxxxxxxxxxxx>]

> -----Original Message-----
> From: cobalt-users-admin@xxxxxxxxxxxxxxx
> [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of SW
> Sent: 16 December 2003 00:04
> To: cobalt-users@xxxxxxxxxxxxxxx
> Subject: Re: [cobalt-users] Upgrading Raq3 OS to 4/4i/4r?
>
>
> Paul,
>
> Thanks for the info. Here is what I found out:
>
> My box is a Raq3 - (based on your info if there is only one network card)
>
> MemTotal:    257552 kB
>
> cmos -c romrev reports 2.3.0
>
> Thanks,
>
> SW

If you are going to install the new OS then go to

http://www.cobaltfaqs.com/modules.php?op=modload&name=Downloads&file=index&r
eq=viewdownload&cid=1

Download the PKG file for the 2.3.38 rom version for RAQ3/4

Say thank you to Bruce!

Install the PKG file BEFORE you do your OS restore.

Once the PKG file has finished you will see the rom pkg in the installed
software.
When you do the OS restore the new ROM version will be the one that will
stick.

The usual warnings apply that your RAQ could be turned into a brick by using
these PKG files etc....

Paul.