[cobalt-users] what kind of hard disk to buy for the Cobalt raq4r

[Swapana Ghosh <swapana_ghosh@xxxxxxxxx>]

Hi


>       So before buying we need to be very careful. 
>Can anyone give me some hints - what are the things i
>need to check in my server to know what kind of hard
>disk with the size  etc, we will buy? Here i am
giving
>the output of the df command. 


    In reference to my previous email, i did the
demesg and it seems that in between the two disks of
our cobalt raq4r, hdc on ide1 has been corrupted. Here
is the few lines of demesg. If i am wrong please
correct me....

    Can anyone tell me what size of hard disk we need
to buy...IF you  need any information, i can provide
to check....

____________________________________________________

hdc: irq timeout: status=0xd0 { Busy }
ide1: reset: success
hdc: read_intr: status=0x59 { DriveReady SeekComplete
DataRequest Error }
hdc: read_intr: error=0x40 { UncorrectableError },
LBAsect=802872, sector=802871
end_request: I/O error, dev 16:01 (hdc), sector 802871
raid1: Disk failure on hdc1, disabling device.
       Operation continuing on 1 device(s)
raid1: md1: rescheduling block 401435
md: recovery thread got woken up ...
md: recovery thread finished ...
dirty sb detected, updating.
md: updating md1 RAID superblock on device
(skipping faulty hdc1 )
hda1 [events: 00000041](write) hda1's sb offset:
768000
.
raid1: md1: redirecting sector 401435 to another
mirror
hdc: irq timeout: status=0xd0 { Busy }
ide1: reset: success
hdc: irq timeout: status=0xd0 { Busy }

_________________________________________________

Best regards.
-Swapna

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com