Re: [cobalt-users] Raq4 moved from collocation, now can't getintoit

["wcstaff" <wcstaff@xxxxxxxxxxxx>]

----- Original Message ----- 
From: "Erik Hansen" <erik@xxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Wednesday, May 28, 2003 2:28 PM
Subject: Re: [cobalt-users] Raq4 moved from collocation, now can't getintoit


> Just double checked but the Raq4 only has 1 port.  I've now hooked up a
> crossover cable direct to another PC and still nothing.  Hoping it's not
the
> port,  don't have a nullmodem cable.  So after I burn the restore CD's I'm
> going to see if that works, just to check the port.
>
> Then I might just load the drive into another PC, and see if I can pull
the
> files directly.
>

change the ip/dns number  from the front panel of the raq. hook up the raq
to a hub on your network. Put the new dns numbers from your raq in your
windows dns setup, right on the top of the list. access the box via either
ssh, telnet or the web, using your admin name and password. We have done it
this way and it works. You can even use the domaqin name, because your
windows machine is going to look at the dns that is at the top of your list
first.