[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [cobalt-users] Raq4 moved from collocation, now can't get into it
- Subject: Re: [cobalt-users] Raq4 moved from collocation, now can't get into it
- From: Gerald Waugh <gwaugh@xxxxxxxxxxxxxxxxxxxxxxx>
- Date: Wed May 28 11:28:01 2003
- List-id: Mailing list for users to share thoughts on Sun Cobalt products. <cobalt-users.list.cobalt.com>
On Wed, 28 May 2003, Erik Hansen wrote:
> >> -----Original Message-----
> >> From: Erik Hansen [mailto:erik@xxxxxxxxxxxxxx]
> >> Sent: Wednesday, May 28, 2003 11:58 AM
>
> >> Is there any easy way to get this working?
> > Did you set the subnet correctly as well??
> > If so, try rebooting, although it should not be necessary.
>
> Yup, as far as I can tell. I've set the IP address, and the subnet equal to
> my network - 192.168.1.21/255.255.255.0. I've also tried setting it to
> 192.168.2.1/255.255.255.0 and setting a PC to 192.168.2.10/255.255.255.0
>
If it has a firewall installed, the firewall is likely blocking
192.168.x.x
Try setting up a PC as a gateway using a routable (public)
IP address / network
connect to the RaQ with a crossover cable (your own public network)
Gerald
--
http://frontstreetnetworks.com | http://store.raqware.com
Front Street Networks LLC, 229 Front Street, Ste.#C
New Haven, CT 06513-3203 | phone: +1-203-785-0699