Hi James,
on 25/1/03 9:29 AM, James Dory wrote:
I just applied the last two Sun patches on two Raq4rs. The first one
seems to have gone off without a hitch. But on one raq, which is
underutilized (/ at 73%, /var at 10%, and /home at 12%), it took a long
time to reboot (after the patch that needed rebooting.). It stayed on
checking disk for some time. It finally came up after about 1/2 hour or
so, but looking at the status gui, under Disk Integrity, I have a
message that 'Server data is being duplicated to the backup hard drive.'
It is at about 50% done after 24 hours.
Any clues or advise? I did check the archives and didn't come up with
anything that seemed applicable.
Recently I had a power outage on a RaQ4r (512MB, 2 x 40Gb) which is running
the Qube3 OS and is fully patched with the latest kernel ... it took over 50
hours for RAID duplication to complete.
I have heard informally that the latest kernel may be the issue.
Perhaps the priority on RAID duplication has been reduced significantly such
that system performance remains close to normal. If this is the case, I'd
prefer the system to be sluggish during RAID duplication and have it done
quickly.
Cheers, Malcolm