Re: [cobalt-users] RaQ4i but not RaQ4r

["MSL Networks Administrator" <admin@xxxxxxxxxxxxxxx>]

you may also try "ofdisk /mbr"
i dont remember what version but microsoft got rid of the master boot record
option for fdisk. ofdisk should work
----- Original Message -----
From: "Jerry Farquhar" <jerry@xxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Sunday, January 05, 2003 2:17 AM
Subject: RE: [cobalt-users] RaQ4i but not RaQ4r


> You'll need to dig up the specific command but I recall a very long time
ago
> having a problem with a drive that needed to be reinstalled with either NT
> (NTFS) after originally being installed with Win9x.  I think there was
> something similar happen with that situation.
>
> Any way check out the switch options for doing a FDisk...
>
> I think what you'll want to try and use is "FDisk /MBR".
>
> My recollection is that it deletes the master boot record on the drive and
> this may be where your having problems.  Again it's been a very long time
> since I've needed to use it but at this point you have nothing to loose.
>
> Jerry
>
> -----Original Message-----
> From: cobalt-users-admin@xxxxxxxxxxxxxxx
> [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of Mike's List
> Sent: Saturday, January 04, 2003 6:04 PM
> To: cobalt-users@xxxxxxxxxxxxxxx
> Subject: RE: [cobalt-users] RaQ4i but not RaQ4r
>
>
> Worst case scenario, I've just going to install 4i onto one disk and use
> the other drive to manually mirror/rsync/dd/etc.  Does anyone has a good
> script/command that I can put into cron?
>
> Thanks.
>
>
> - Mike
>
>
> _____________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
> _____________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>