Re: [cobalt-users] Internal Network Connect

[Gerald Waugh <gwaugh@xxxxxxxxxxxxxxxxxxxxxxx>]

On Wed, 23 Oct 2002, Theo wrote:

>
> I am not quite sure how I can connect to me Raq3i box on my own private network,
> from my W2000 machine to it, through http, or telnet.  Can I connect to it
> using the direct port to port patch or cross-over cable, or should I use two regular
> cables and a port-hub?

  If you only have the two computers you can do it either way!
>
> Also, what would be the optimum IP settings to use on both machines?
>
> Local, W2000 ::
>    IP > XXX.XXX.XXX.XXX ?
          192,168,1.10
>    SUBNET > XXX.XXX.XXX.XXX ?
          255.255.255.0
>    GATEWAY > XXX.XXX.XXX.XXX ?
>         192.168.1.1
> Local, Raq3i Unit ::
>    IP > XXX.XXX.XXX.XXX ?
          192.168.1.1 (eth1)
    ISP ->  1.  2.3.4 (eth0)
>    SUBNET > XXX.XXX.XXX.XXX ?
           192.168.1.0 (eth1)
     ISP->   1.2.3.4
>    GATEWAY > XXX.XXX.XXX.XXX ?
     ISP_>  1.2.3.4

You will have to use masquerading.
firewall software
   ipchains with pmfirewall is OK.


Gerald
--
http://frontstreetnetworks.com | http://raqware.com
Front Street Networks LLC  | Phone: +1 203-785-0699
229 Front Street, Ste. C, New Haven, CT. 06513-3203