Re: [cobalt-users] Raq4i OS-Restore CD on a Raq3i ?

[Spacey <space_biscuit@xxxxxxxxx>]

> Theo
> We had Raq3's and used the Raq4i restore CD to update the boxes to 4. If you
> have a 3i I would use the 4i OSRCD. We purchased a set from Gerald to do
> ours. Worked great, as long as your drive is under 30 gig. We had a 40 gig
> drive that didn't want to partition correct. The 20 gig we had was fine.
> They may have corrected the larger drive issue by now. One reason for a
> custom CD is that this way you will have all the patches on the CD there by
> dropping the need to patch up to current after the run. The 4 is a much
> better build BTW. More add-ons and more then likely a longer update life.
> -- 
> Thanks!!
> Dave Thurman


Thanks Dave!,

I'm going to try the 4 restore then.  Thanks much for the affirmation...
I'll let you all know how that goes...

By the way, the thing that cleared up my "IDE not found" a couple days ago was 
that I found that I had the dongle-switch on the HD on the wrong pins.  I switched 
it to the master pins and then it cleared away that problem.

Theo




=====
##### * ##### * ##### * END MESSAGE * ##### * ##### * #####

space_biscuit@xxxxxxxxx
yahoo_pager : space_biscuit

__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/