Re: [cobalt-users] Lost web interface w/ raq4

[Jeff Lasman <jblists@xxxxxxxxxxxxx>]

Gerald Waugh wrote:

> [root /root]# dmesg | grep eth0
> eth0: Invalid EEPROM checksum 0xc5f8, check settings before activating this
> device!
> eth0: Intel PCI EtherExpress Pro100 82559ER, 00:10:E0:02:18:B3, I/O at
> 0x6200, IRQ 11.
> [root /root]# dmesg | grep eth1
> eth1: Invalid EEPROM checksum 0x11f9, check settings before activating this
> device!
> eth1: Intel PCI EtherExpress Pro100 82559ER, 00:10:E0:02:19:FF, I/O at
> 0x6240, IRQ 10.
> 
> I checked sever RaQ4s and they all say the above

Hmmm... so it does.  There's a difference between grepping the output of
the dmesg command and grepping the contents of /var/log/dmesg.

Thank you, Gerald, for bringing that to our attention.

So, Jim, that's why my output and yours didn't match.  I'm truly sorry
for the confusion I caused you.  Now can anyone tell me why they're
different?

Jeff
-- 
Jeff Lasman <jblists@xxxxxxxxxxxxx>
Linux and Cobalt/Sun/RaQ Consulting
nobaloney.net
P. O. Box 52672, Riverside, CA  92517
voice: (909) 778-9980  *  fax: (702) 548-9484