Re: [cobalt-users] Problem with installing Restore CD on RAQ Server

["cbtrussell" <cbtrussell@xxxxxxxxxxx>]

> My badge on the "right side of the faceplate" says "Raq 3". I would assume
> then that yours is simply a "Raq" or "Raq 1" if it doesn't state the
number
> right there. Probably explains why you're not getting up and running. For
> instance, I would be highly doubtfull of Raq 4 OS resore working on my RAQ
> 3.

Well, as a matter of fact, I've restored 6 RaQ3's to the RaQ4 OS tonight in
the past 2 hours. So I hope you're wrong.  <g>

You can restore a RaQ(1) hardware to a RaQ2 OS, they have similar hardware
and both use a MIPS processor. Likewise with the RaQ3/4 or RaQ3i/4i, the
hardware is identical except for a 300Mhz processor vs. a 450.

Note, whenever advertising/selling/referring to a RaQ, ALWAYS use its
original factory hardware configuration. A RaQ3 is a RaQ3 is always a .....
RaQ3.

As far as your RaQ goes, you can upgrade to the RaQ2 OS. There may be an
extra step or two required, check the archives as I haven't done that
particular restore.

Good luck,

Brandon