Re: [cobalt-users] RaQ4r raid not showing in gui

[Rickard Osser <ricky@xxxxxxxx>]

On Sat, 2002-02-16 at 10:32, Jeff Lasman wrote:
> Rickard Osser wrote:
> 
> > Hi Jeff,
> > 
> > your first driv /dev/hda isn't available. It should look like:
> > [root scripts]# cat /proc/mdstat
> > Personalities : [linear] [raid0] [raid1] [raid5] [translucent]
> > read_ahead 1024 sectors
> > md1 : active raid1 hdc1[1] hda1[0] 768000 blocks [2/2] [UU]
> > md3 : active raid1 hdc3[1] hda3[0] 205056 blocks [2/2] [UU]
> > md4 : active raid1 hdc4[1] hda4[0] 28181056 blocks [2/2] [UU]
> > md6 : active raid1 hdc6[1] hda6[0] 131456 blocks [2/2] [UU]
> > unused devices: <none>
> 
> > Best regards,
> 
> Thanks <smile>; it's good to hear from you again!
> 
jeff, I just remembered one thing about the ISO-images for the
RaQ4/Qube3, they don't really see larger disks than ~40GB... If you put
in larger they will only use around 8GB for the home partition. This is
ofcourse fixable but can be a hassle for users not used to
"re-partitioning" live file-systems.

Best regards,

Rickard