Re: [cobalt-users] RaQ4r raid not showing in gui

[Jeff Lasman <jblists@xxxxxxxxxxxxx>]

Rickard Osser wrote:

> Hi Jeff,
> 
> your first driv /dev/hda isn't available. It should look like:
> [root scripts]# cat /proc/mdstat
> Personalities : [linear] [raid0] [raid1] [raid5] [translucent]
> read_ahead 1024 sectors
> md1 : active raid1 hdc1[1] hda1[0] 768000 blocks [2/2] [UU]
> md3 : active raid1 hdc3[1] hda3[0] 205056 blocks [2/2] [UU]
> md4 : active raid1 hdc4[1] hda4[0] 28181056 blocks [2/2] [UU]
> md6 : active raid1 hdc6[1] hda6[0] 131456 blocks [2/2] [UU]
> unused devices: <none>

Thanks, Rikard.  That's what I thought.

> if everything is correct. Anyway, try using fdisk /dev/hda to check if
> you can find the drive,

fdisk gave us the same error for both drives; I don't remember what it
was, though <frown>.

We've removed the system from service for rebuilding.  It was about to
get turned on for a client, so I had to drive back to San Diego to bring
down a new one <frown>.  Done, and at 1:31 am my time, I'm about to go
to bed <smile>.

> also check with "dmesg" and the messages
> log-file if it gives any information while booting.

While that would have been an excellent idea, the system is now turned
down and I have a feeling it'll be taken apart for rebuilding (new
matched drives) by Monday.

> Best regards,

Thanks <smile>; it's good to hear from you again!

Jeff
-- 
Jeff Lasman <jblists@xxxxxxxxxxxxx>
Linux and Cobalt/Sun/RaQ Consulting
nobaloney.net
P. O. Box 52672, Riverside, CA  92517
voice: (909) 778-9980  *  fax: (702) 548-9484