[cobalt-users] reboot

[Lucas <lvaldeon@xxxxxxxxxxxxxxxx>]

	Hi,

		I have a RaQ3 dedicated server.
We have been uptime for 60 days , then the server rebooted without any 
reason. After that the server was online for 65 days and rebooted again 
without any reason. 2 days later, today, rebooted. We talked to our 
provider and he said they didn't do anything, they didn't reboot. A 
friend of mine has a server in the same provider with same software. He 
is uptime from 260 days.

	What is going on ? We are lost.

	We uninstall all services and install qmail, apache, and everything from 
sources.

In dmesg the only error line is

eth0: Invalid EEPROM checksum 0xeff3, check settings before activating 
this device!

But the net works properly.

dmesg
-----------------------------------------------------------------Linux 
version 2.2.16C28_III (root@xxxxxxxxxxxxxx) (gcc version egcs-2.91.66 
19990314/Linux (egcs-1.1.2 release)) #1 Mon Jul 30 22:07:58 PDT 2001
Ignoring bogus EBDA pointer 1AFF000
Detected 298812 kHz processor.
Pending 0x00
Calibrating delay loop... 596.38 BogoMIPS
Memory: 127796k/131072k available (1244k kernel code, 416k reserved, 
1552k data, 64k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 32K  L1 D Cache: 32K
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx)
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Cobalt watchdog v1.4 enabled
Cobalt I2C bus initialized
Cobalt temperature sensor v1.3 enabled
Serial driver version 4.27 with<4>keyboard: Timeout - AT keyboard not 
present?
keyboard: Timeout - AT keyboard not present?
 no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
lcd: Cobalt LCD Driver v3.12
serialnumber: Version 1.9 initialized. Serial number=0b00000766388701.
Copyright (c)1994-2000 Axent Technologies, Inc.
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: chipset revision 193
ALI15X3: 100% native mode on irq 14
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST320413A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ST320413A, 19092MB w/1024kB Cache, CHS=38792/16/63, UDMA(33)
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
translucent personality registered
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :   758.571 MB/sec
   p5_mmx    :   701.040 MB/sec
   8regs     :   321.564 MB/sec
   32regs    :   199.263 MB/sec
using fastest function: pII_mmx (758.571 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 hda3 hda4
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 131536k swap-space (priority -1)
Cobalt Networks Bandwidth Limiting Module
Copyright (c) 1999, Cobalt Networks, Inc.
All rights reserved
eth0: Invalid EEPROM checksum 0xeff3, check settings before activating 
this device!
eth0: Intel PCI EtherExpress Pro100 82559ER, 00:10:E0:02:13:DD, I/O at 
0x6040, IRQ 11.
  Board assembly 000000-000, Physical connectors present:
  Primary interface chip None PHY #0.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0xdbd8681d).
  Receiver lock-up workaround activated.
iplog uses obsolete (PF_INET,SOCK_PACKET)
-----------------------------------------------------------------


	Thank you in advance,

		Lucas