Re: [cobalt-users] Searching for a text string RaQ3.

["Thomas" <tsanders.cobalt@xxxxxxxxxx>]

Man, I wish I knew about RPL when I moved 100 sites to my RaQ4 and the FP
was broken because of the config files in the _vti directories.  I had to
hand edit all those, as I am not mr script.  (well I could at least get the
names of the files that needed editing.)

I'll pass this around to my *nix buddies, and see what they think.  Most
likely they will all say, "Oh yeah been using that for a while, isnt that
great." or "Oh I use something else, called ..."

At any rate thank you!

-Thomas

----- Original Message -----
From: "Steve Werby" <steve-lists@xxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Sunday, December 02, 2001 10:05 AM
Subject: Re: [cobalt-users] Searching for a text string RaQ3.


> "FantasticMoms.com" <admin@xxxxxxxxxxxxxxxxx> wrote:
> > I need to find out if there is a way of searching a RaQ3 for the
presence
> of
> > a certain text string *within* any of the *.htm files on the drive?
>
> You can use the "find" command to locate all of the files containing that
> text and additional commands to do the replacement if necessary, but it
can
> get rather complex.  I suggest downloading rpl from laffeycomputer.com and
> using it instead.  It's simple to install following the included
> instructions.  It has a simulate mode that can be used to locate all files
> containing the matching string without doing a replacement and a standard
> mode which will do a replacement.
>
> http://downloads.laffeycomputer.com/current_builds/rpl-1.3.0b3.tar.gz
>
> > My ISP (AT&T@Home) has just changed my email address without notice,
from
> > @home.com to @attbi.com
>
> Be glad you're not one of the millions that ExciteAtHome has left with no
> service.
>
> > This means each and every one of my forms and email addresses needs to
be
> > changed.
>
> You might want to consider using email addresses of domains hosted on your
> box.  If desired you can setup the addresses to forward to an external
> address.  Then if this happens again you'll only need to do the change in
> the GUI.
>
> --
> Steve Werby
> President, Befriend Internet Services LLC
> http://www.befriend.com/
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>