RE: [cobalt-users] [Any News?] RaQ4-All-Kernel-1.0.1-2.216C27III. pkg

[Clive Harper <CHarper@xxxxxxxxxxxx>]

> I am only a newbie, please advise...
> I also installed this patch and have only now realised (from 
> your post)
> that I too may be in the same position...
> 
> My GUI says the mirroring is working correctly, when I go to shell and
> type 'top' I get these lines in the report...
> 
>  PID USER     PRI  NI  SIZE  RSS SHARE STAT  LIB %CPU %MEM   TIME
> COMMAND
> 
>     6 root     -20 -20     0    0     0 SW<     0  0.0  0.0   0:00
> mdrecoveryd
>     7 root     -20 -20     0    0     0 SW<     0  0.0  0.0   0:00
> raid1d
>     8 root     -20 -20     0    0     0 SW<     0  0.0  0.0   0:00
> raid1d
>     9 root     -20 -20     0    0     0 SW<     0  0.0  0.0   0:00
> raid1d
>    10 root     -20 -20     0    0     0 SW<     0  0.0  0.0   0:00
> raid1d
> 
> Could somebody tell me if my raid is still working?
> 
> Thank you again to all the participants of this list...
> 
> Tim Lawson

I have also installed this patch on a RAQ4r but my raid appears to be
working fine, see below.

[root /proc]# more /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid5] [translucent] 
read_ahead 1024 sectors
md1 : active raid1 hdc1[1] hda1[0] 768000 blocks [2/2] [UU]
md3 : active raid1 hdc3[1] hda3[0] 205056 blocks [2/2] [UU]
md4 : active raid1 hdc4[1] hda4[0] 18869696 blocks [2/2] [UU]
md6 : active raid1 hdc6[1] hda6[0] 131456 blocks [2/2] [UU]
unused devices: <none>
[root /proc]# 

As you can see it is showing that the mirrored partitions are both up [UU]
try this same procedure on your RAQ4r and see if you get the same results.

----
Clive Harper