Re: [cobalt-users] SSL problem on Raq4

[Brian Coughter <brianc@xxxxxxxxxxxxxx>]

Nevermind you guys.  I fixed the problem.  I just disabled SSL in the Cobalt
GUI and re-enabled it.
 
--
Brian Coughter

> From: Brian Coughter <brianc@xxxxxxxxxxxxxx>
> Reply-To: cobalt-users@xxxxxxxxxxxxxxx
> Date: Thu, 03 May 2001 09:25:10 -0400
> To: Cobalt Developers List <cobalt-developers@xxxxxxxxxxxxxxx>, Cobalt Users
> List <cobalt-users@xxxxxxxxxxxxxxx>
> Subject: [cobalt-users] SSL problem on Raq4
> 
> I am having a rather strange SSL problem.  My Global Verisign Certificate
> was working great on the main site for the raq a week ago.  Since then, I
> realized that I had my Ethernet interfaces reversed.  Interface 1 is
> connected to the Internet (global IP) and Interface 2 is connected to my LAN
> (Local IP).  In an effort to use AppleTalk, I attempted to switch the
> Ethernet connection by flip-flopping the wires and flip-flopping the IP
> addresses between the two Ethernet ports.  Well I had problems with that.  I
> wasn't able to pull up any sites and my administration area would only work
> under a local IP (192.168.150.2).  So I switched everything back and
> rebooted.  Now my SSL Administration area at http://ns1.bluewaterg.com/admin
> works fine but when I try to pull up https://ns1.bluewaterg.com It times
> out.  I had checked the httpd.conf file - vhosts section to see what the IP
> address was.  It was set to the local IP while all other vhosts were set to
> global IPs (the way it should be).  So I changed the IP back to the global
> IP (63.107.172.130) and restarted httpd.  Still nothing works.  Can anyone
> offer me any suggestions before I call Sun/Cobalt professional support?
> 
> Thank you
> --
> Brian Coughter
> Internet Services
> 
> Blue Water Graphics, Inc.
> 7977 SW Jack James Drive
> Stuart, Florida 34997
> 
> 561-286-2249  (Tel)
> 561-286-3055  (Fax)
> 
> brianc@xxxxxxxxxxxxxx
> 
> 
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>