[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[cobalt-users] I can't telnet, or from serial port.
- Subject: [cobalt-users] I can't telnet, or from serial port.
- From: "Pumin Wuvanich" <pumin@xxxxxxxxxxx>
- Date: Fri Mar 2 11:22:00 2001
- List-id: Mailing list for users to share thoughts on Cobalt products. <cobalt-users.list.cobalt.com>
Hello.
Brief, and quick help needs. I can't telnet to Cobalt Raq 3 [all patches is
currently updated], via internet, or serial port, it said 'unable to load
interpreter'. This problem causes when I update latest patch from Cobalt,
I'm not sure which one though, since I put 3-4 packages on that day. Below
is boot log from external terminal. Any suggestions are welcome.
Thanks in advance.
-Pumin
###########################
Cobalt Networks - 'We serve it, you surf it'
Firmware version 2.3.0
ROM Build info: Wed Oct 6 15:23:25 PDT 1999 freakshow.cobaltnet.com
System serial number: 3C02AM9460168
Memory found: 128 MB
Initializing I2C bus: done
Scanning PCI bus: done
Initializing IDE: done
IDE 0 master: found
slave: not found
IDE 1 master: not found
slave: not found
Initializing SCSI: done
Initializing ethernet: done
Initializing EEPROMs: done
EEPROM Bank 0: Intel E28F008S5 1MB
EEPROM Bank 1: not installed.
Mounting rom_fs: done
Initializing RTC: done
Initializing i18n - language "en": done
Press spacebar to enter ROM mode
Booting default method - From disk
First stage kernel: Decompressing - done
Linux version 2.2.12C3 (thockin@freakshow) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 (ROM kernel) Wed Oct 6 15:16:06 PDT
1999
Detected 298807189 Hz processor.
Calibrating delay loop... 596.38 BogoMIPS
Memory: 14424k/16384k available (1080k kernel code, 416k reserved, 400k
data, 64k init)
VFS: Diskquotas version dquot_6.4.0 initialized
Enabling new style K6 write allocation for 16 Mb
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx)
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-583f to device 00:18
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IPv4 over IPv4 tunneling driver
early initialization of device tunl0 is deferred
GRE over IPv4 tunneling driver
early initialization of device gre0 is deferred
NET4: AppleTalk 0.18 for Linux NET4.0
Initializing RT netlink socket
Starting kswapd v 1.2
Cobalt temperature sensor v1.2 enabled
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Keyboard timeout[2]
Keyboard timeout[2]
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
lcd: Cobalt LCD Driver v3.01 by
lcd: Andrew Bose <andrew@xxxxxxxxxxxxx>, Timothy Stonis <tim@xxxxxxxxxxxxx>
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.20
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: 100% native mode on irq 14
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CX13.0A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ALI15X3: Ultra DMA enabled
hda: QUANTUM FIREBALL CX13.0A, 12416MB w/418kB Cache, CHS=25228/16/63,
(U)DMA
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
sym53c8xx: at PCI bus 0, device 14, function 0
sym53c8xx: 53c875 detected
sym53c875-0: rev=0x04, base=0xc0000000, io_port=0x1000, irq=12
sym53c875-0: NCR clock is 40218KHz, 40218KHz
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xc0008000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
scsi : detected total.
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
eth0: Invalid EEPROM checksum 0x6196, check settings before activating this
device!
eth0: Intel EtherExpress Pro 10/100 at 0x1100, 00:10:E0:00:B6:50, IRQ 11.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
eth1: Invalid EEPROM checksum 0x6096, check settings before activating this
device!
eth1: Intel EtherExpress Pro 10/100 at 0x1200, 00:10:E0:00:B6:4F, IRQ 10.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
Partition check:
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
BOOTLOADER: Mapping in physical locations
BOOTLOADER: load_addr=0xc1804000 ret_data=0xc1a05b70
BOOTLOADER: opening "/boot/vmlinux.gz"
BOOTLOADER: reading "/boot/vmlinux.gz"
BOOTLOADER: read 593772bytes
BOOTLOADER: mapping 16M-32M for ride home
BOOTLOADER: disabling interupts
BOOTLOADER: flushing cache
BOOTLOADER: Leap of faith!
Second stage kernel: Decompressing - done
Linux version 2.2.14C10 (root@xxxxxxxxxxxxxxxxxx) (gcc version 2.95.2
19991024 (release)) #3 Wed Jun 21 15:05:10 JST 2000
Ignoring bogus EBDA pointer 16EF000
Detected 298813717 Hz processor.
Calibrating delay loop... 596.38 BogoMIPS
Memory: 127980k/131072k available (1076k kernel code, 416k reserved, 1540k
data, 60k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: AMD AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx)
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.3
Cobalt watchdog v1.3 enabled
Cobalt temperature sensor v1.2 enabled
Serial driver version 4.27 with no serial options enabled
Keyboard timeout[2]
Keyboard timeout[2]
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
lcd: Cobalt LCD Driver v3.01 by
lcd: Andrew Bose <andrew@xxxxxxxxxxxxx>, Timothy Stonis <tim@xxxxxxxxxxxxx>
serialnumber: Version 1.1 initialized. Serial number=f700000617a74601.
Copyright (c) 1994-2000 Axent Technologies, Inc
Uniform Multi-Platform E-IDE driver Revision: 6.30
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: 100% native mode on irq 14
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CX13.0A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ALI15X3: Ultra DMA enabled
hda: QUANTUM FIREBALL CX13.0A, 12416MB w/418kB Cache, CHS=25228/16/63,
(U)DMA
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
translucent personality registered
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 671.322 MB/sec
p5_mmx : 647.319 MB/sec
8regs : 448.437 MB/sec
32regs : 280.797 MB/sec
using fastest function: pII_mmx (671.322 MB/sec)
sym53c8xx: at PCI bus 0, device 14, function 0
sym53c8xx: 53c875 detected
sym53c875-0: rev=0x04, base=0xc0000000, io_port=0x1000, irq=12
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xc0008000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
scsi : detected total.
eth0: Invalid EEPROM checksum 0x6196, check settings before activating this
device!
eth0: Intel EtherExpress Pro 10/100 at 0x1100, 00:10:E0:00:B6:50, IRQ 11.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
eth1: Invalid EEPROM checksum 0x6096, check settings before activating this
device!
eth1: Intel EtherExpress Pro 10/100 at 0x1200, 00:10:E0:00:B6:4F, IRQ 10.
Board assembly 000000-000, Physical connectors present:
Primary interface chip None PHY #0.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xdbd8681d).
Receiver lock-up workaround activated.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3 hda4
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
INIT: version 2.77 booting
Activating swap partitions Adding Swap: 131536k swap-space (priority -1)
Setting hostname www.xxxxx.com
rm: cannot unlink `/etc/locks/.lcdlock': Read-only file system
Checking root filesystem
/dev/hda1: clean, 32410/192512 files, 531740/768095 blocks
ok
mount: proc already mounted
Remounting root filesystem in read-write mode
Finding module dependencies
Checking filesystems
/dev/hda3: clean, 434/51376 files, 18292/205128 blocks
/dev/hda4: clean, 11109/2904064 files, 1190524/11610144 blocks
ok
Mounting local filesystems
Setting clock (utc): Fri Feb 16 02:44:29 PST 2001 Fri Feb 16 02:44:29 PST
2001
Enabling swap space
Cobalt Networks Bandwidth Limiting Module
Copyright (c) 1999, Cobalt Networks, Inc.
All rights reserved
INIT: Entering runlevel: 3
Starting system logger: syslogd
Starting kernel logger: klogd
Starting tmpinit
Starting network Disabling IPv4 packet forwarding.
ifconfig lo 127.0.0.1 netmask 255.0.0.0 broadcast 127.255.255.255
ifconfig eth0 xxx.xx.xx.xx netmask 255.255.248.0 broadcast 216.2.103.255
ifconfig eth1 xx.xx.xx.xx netmask 255.255.252.0 broadcast 216.2.103.255
Starting NFS file locking services:
Starting NFS lockd: rpc.lockdportmap: RPC call returned error 111
RPC: task of released request still queued!
RPC: (task is on xprt_pending)
portmap: RPC call returned error 111
RPC: task of released request still queued!
RPC: (task is on xprt_pending)
lockd_up: makesock failed, error=-111
portmap: RPC call returned error 111
RPC: task of released request still queued!
RPC: (task is on xprt_pending)
lockdsvc: Connection refused
Starting NFS statd: rpc.statd
Starting quota 11 boots since last quotacheck
Checking quotas. This may take some time.
Scanning /dev/hda4 [/home]-done
Checked 1120 directories and 9981 files
Using quotafile /home/quota.user
Using quotafile /home/quota.group
Done.
Turning on quota.
/dev/hda4: group quotas turned on
/dev/hda4: user quotas turned on
Starting random Initializing random number generator...
Starting storage Setting up Storage
Starting cron daemon: crond
Setting up SNMP service: snmpd
Starting INET services: inetd
Setting up DNS Server: named
Starting arkeia /etc/rc.d/rc3.d/S60arkeia: /usr/bin/NLSERVD_*[0-9]: No such
file or directory
Starting nfsfs Mounting remote filesystems.
Starting admserv Starting admin web server: /usr/sbin/httpd
Setting up PostgreSQL: [906]
Starting httpd Setting up Web Service: /usr/sbin/httpd
Setting up Mail Service: sendmail
Starting bwmgmt Setting up Bandwidth
Starting lcdsleep.init
Starting networker: nsrexecd
Starting local adore.c:30: linux/modversions.h: No such file or directory
adore.c:33: linux/config.h: No such file or directory
adore.c:34: linux/stddef.h: No such file or directory
adore.c:35: linux/module.h: No such file or directory
adore.c:36: linux/kernel.h: No such file or directory
adore.c:38: linux/proc_fs.h: No such file or directory
adore.c:39: linux/sched.h: No such file or directory
adore.c:40: linux/dirent.h: No such file or directory
adore.c:41: linux/fs.h: No such file or directory
adore.c:43: linux/malloc.h: No such file or directory
adore.c:44: linux/unistd.h: No such file or directory
adore.c:45: linux/string.h: No such file or directory
In file included from adore.c:46:
/usr/include/sys/syscall.h:25: asm/unistd.h: No such file or directory
adore.c:47: linux/dcache.h: No such file or directory
adore.c:49: linux/dirent.h: No such file or directory
adore.c:50: linux/file.h: No such file or directory
adore.c:51: asm/uaccess.h: No such file or directory
adore.c:52: linux/smp_lock.h: No such file or directory
adore.c:53: linux/capability.h: No such file or directory
In file included from /usr/include/sys/ioctl.h:27,
from ava.c:33:
/usr/include/bits/ioctls.h:24: asm/ioctls.h: No such file or directory
In file included from /usr/include/sys/ioctl.h:30,
from ava.c:33:
/usr/include/bits/ioctl-types.h:25: asm/ioctls.h: No such file or directory
In file included from /usr/include/errno.h:36,
from ava.c:37:
/usr/include/bits/errno.h:25: linux/errno.h: No such file or directory
In file included from /usr/include/signal.h:300,
from /usr/include/sys/signal.h:1,
from ava.c:38:
/usr/include/bits/sigcontext.h:28: asm/sigcontext.h: No such file or
directory
In file included from /usr/include/signal.h:300,
from libinvisible.c:43:
/usr/include/bits/sigcontext.h:28: asm/sigcontext.h: No such file or
directory
/etc/rc.d/rc3.d/S99local: ./ava: No such file or directory
Cobalt Linux release 5.0 (Pacifica)
Kernel 2.2.14C10 on an i586
www.xxxx.com login: admin
Unable to load interpreter
Cobalt Linux release 5.0 (Pacifica)
Kernel 2.2.14C10 on an i586
www.xxxx.com login: root
Unable to load interpreter
Cobalt Linux release 5.0 (Pacifica)
Kernel 2.2.14C10 on an i586
www.xxxx.com login: frank
Unable to load interpreter
################################################################
INIT: Switching to runlevel: 6
INIT: Sending processeShutting down PostgreSQL: postmaster ok
Shutting down Mail Service: sendmail ok
Shutting down SNMP service: snmpd ok
Shutting down DNS Server: named ok
Stopping INET services: inetd ok
Stopping cron daemon: crond ok
Shutting down NFS file locking services:
Shutting down NFS lockd: ERROR!
Shutting down NFS statd: ERROR!
Stopping httpd Shutting down Web Service: httpd
Stopping random Saving random seed...
Stopping nfsfs Unmounting remote filesystems.
Stopping network Disabling IPv4 packet forwarding.
Shutting down kernel logger: klogd ok
Shutting down system logger: syslogd ok
Sending all processes the TERM signal...
INIT: no more processes left in this runlevel
Sending all procmd: recovery thread got woken up ...
esses the KILL smd: recovery thread finished ...
ignal..
mdrecoveryd(6) flushing signals.
Turning off swap
Unmounting file systems
Remounting remaining filesystems (if any) readonly
SYSTEM REBOOTING
stopping all md devices.
disabling network interfaces.
Restarting system.