Re: [cobalt-users] RaQ4>Invalid Checksum, server freezed.

["Arsalan Mahmud" <arsalan@xxxxxxxxxxxx>]

Looks like some one got your server rooted via the rpc exploit and killed
and rm the rpc binary to avoid it being hacked again!. Or you migh have
deleted it your self or something :)

Arsalan

----- Original Message -----
From: "Emilio Saldana" <emilio@xxxxxxxxxxxxxxx>
To: "Cobalt users" <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Sunday, October 01, 2000 1:36 AM
Subject: [cobalt-users] RaQ4>Invalid Checksum, server freezed.


> Hello all,
>
> I have a RaQ4 and it sudenly freezes for no aparent reason, if I reboot
> the server it will respond again.
>
> It is the forth server we have switched for the same problem, although
> we have more raq servers connected to the same switch and
> they are up and running. I found the following error messages on
> startup. Any hint?
>
> A copy of both error messages are copied here:
>
> --------------------------------------------
> eth0: Invalid EEPROM checksum 0x58c5, check settings before activating
> this device!
> eth0: Intel EtherExpress Pro 10/100 at 0x6200, 00:10:E0:01:E5:46, IRQ
> 11.
>   Board assembly 000000-000, Physical connectors present:
>   Primary interface chip None PHY #0.
>   General self-test: passed.
>   Serial sub-system self-test: passed.
>   Internal registers self-test: passed.
>   ROM checksum self-test: passed (0xdbd8681d).
>   Receiver lock-up workaround activated.
> eth1: Invalid EEPROM checksum 0x53ca, check settings before activating
> this device!
> eth1: Intel EtherExpress Pro 10/100 at 0x6240, 00:10:E0:01:EA:41, IRQ
> 10.
>   Board assembly 000000-000, Physical connectors present:
>   Primary interface chip None PHY #0.
>   General self-test: passed.
>   Serial sub-system self-test: passed.
>   Internal registers self-test: passed.
>   ROM checksum self-test: passed (0xdbd8681d).
>   Receiver lock-up workaround activated.
>
> Cobalt Networks Bandwidth Limiting Module
> Copyright (c) 1999, Cobalt Networks, Inc.
> All rights reserved
> portmap: RPC call returned error 111
> RPC: task of released request still queued!
> RPC: (task is on xprt_pending)
> portmap: RPC call returned error 111
> RPC: task of released request still queued!
> RPC: (task is on xprt_pending)
> lockd_up: makesock failed, error=-111
> portmap: RPC call returned error 111
> RPC: task of released request still queued!
> RPC: (task is on xprt_pending)
> --
> Emilio Saldana
> Director General,
> ADigital Mexico
> http://adigital.com.mx/
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>