[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [cobalt-users] DNS Problem? Admin, Email , Websites not accessible.
- Subject: Re: [cobalt-users] DNS Problem? Admin, Email , Websites not accessible.
- From: "Arsalan Mahmud" <arsalan@xxxxxxxxxxxx>
- Date: Mon Sep 25 15:42:34 2000
Hi,
If you are using skynetweb its their networks problem. If not its most
probebely the BGP protocol messing up.
As for the settings. I am not an expert with ns servers but you dont need
to mess with the default settings on the cobalt.
Arsalan
----- Original Message -----
From: "John Cordeiro" <jcordeiro@xxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Tuesday, September 26, 2000 3:35 AM
Subject: RE: [cobalt-users] DNS Problem? Admin, Email , Websites not
accessible.
> Hi All
>
> Help Please we need some advise!
>
> We have two RaQ 3i and we want setup Primary and Secondary DNS
> RaQ 1 : NS1.DOMAIN.NET with IP 111.111.111.111
> and RaQ2 : NS2.DOMAIN.NET with IP 222.222.222.222
> The NS1 Host the websites and the DNS Records and the
> NS2 Just DNS Records,
> The IP of the sites on NS1 is 111.111.111.111
>
> What is the right setup on DNS Records
> and SOA ( Refresh, Retry, Expire, Minimum ),?
>
> The time on SOA ( Refresh, Retry, Expire, Minimum )
> has to be the same on both RaQs for each Domain DNS Records?
>
> The SetUp for SOA on the first RaQ is :
> Primary Server : NS1.DOMAIN.NET
> Secondary Server : NS2.DOMAIN.NET
>
> The SetUp for SOA on the Second RaQ is :
> Primary Server : NS1.DOMAIN.NET
> Secondary Server : NS2.DOMAIN.NET is this correct ?
>
> We asking these because the servers every day between
> 10.30pm and 10.30 am Admin, Email , Web sites are not accessible.
> But during the day everything it works perfect
> Email, Admin, and Web Sites.
> Can anyone tell me what's Happening?
>
> When we run PING between 10.30pm and 10.30am
> there is error Time out. This is going on Three Days now.
> Our Servers are Co-Located!
>
> If anyone has a clue about this story please Help me.
>
> Cheers
> John Milo
>
>
> I had a similar problem with my first RAQ3I, but our didn't happen for a
> specific 12hr period. It did however seem to up and down. Failing on mail
> clients, www sites, and telnet sessions. When I put a sniffer on the line
I
> was getting junk packets from the primary interface on the Raq. Good
> indication of a failed NIC. So cobalt replaced the Unit. Overnight I might
> add.
>
> JohnC
>
>
>
>
>
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>
>