Re: [cobalt-users] Macintosh clients with Qube2

[spamcatcher <spamcatcher@xxxxxxxxx>]

Hi,

You need to put the DNS addresses in the NAME SERVER ADDRESS field in the 
TCP/IP control panel. Depending on your network setup, 802.3 may need to 
be checked off. Also, make sure that under options, the "load only when 
needed" option is unchecked (off).

The gateway address should be the IP of your router, not your Qube2.

Hope this helps.

-Webslave-

>On the Qube I have a primary & secondary DNS set up using addresses provided
>bu our ISP (194.126.82.5 & 194.126.86.9)
>
>On the mac in tcp/ip settings I have tried putting the Qube address, I have
>also tried this as the router address but no joy.
>
>Apologies for being so clueless but I am still finding my way with mac admin
>
>----- Original Message -----
>From: cobaltuser@xxxxxxxx
>To: cobalt-users@xxxxxxxxxxxxxxx
>Sent: 13 September 2000 20:48
>Subject: Re: [cobalt-users] Macintosh clients with Qube2
>
>
>What do you have setup as your DNS Search IPs?
>
>
>At 9/13/00 12:18 PM, you wrote:
>>I am trying to use a Qube2 in mixed pc/Mac environment to browse and
>connect
>>to POP3 mailboxes using a modem. I am familiar with PC settings and they
>>work fine. Macs will connect to the Qube through browser but will not go
>>outside our network.
>>
>>Can anyone give me a simple guide to tcp/ip settings for the macs.
>>
>>Thanks
>>
>>Paul Freedman
>>
>>
>>_______________________________________________
>>cobalt-users mailing list
>>cobalt-users@xxxxxxxxxxxxxxx
>>To Subscribe or Unsubscribe, please go to:
>>http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>
>
>_______________________________________________
>cobalt-users mailing list
>cobalt-users@xxxxxxxxxxxxxxx
>To Subscribe or Unsubscribe, please go to:
>http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>
>_______________________________________________
>cobalt-users mailing list
>cobalt-users@xxxxxxxxxxxxxxx
>To Subscribe or Unsubscribe, please go to:
>http://list.cobalt.com/mailman/listinfo/cobalt-users
>