Re: [cobalt-users] Using "At" command to take a backupfromCobaltNASRAQ to NT Server using scripts.

["Frank Cubillos" <cubillos@xxxxxxxxxxxxxxxxxx>]

They don't support it, that's ok though I am moving back to HP and they will
handle the backup for me. Whew! Thanks for the info I am sure there other
folks with the same issue.

Frank
----- Original Message -----
From: "Malcolm McLeary" <mim@xxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Tuesday, May 30, 2000 8:20 PM
Subject: Re: [cobalt-users] Using "At" command to take a
backupfromCobaltNASRAQ to NT Server using scripts.


> Hi Frank,
>
> on 31/5/00 10:37 AM, Frank Cubillos at cubillos@xxxxxxxxxxxxxxxxxx wrote:
>
> > Ok on the adding network volume, where do I add the IP number for the
> > server, our server is not at this location or attached to my 2000
network.
>
> So you are telling me that the Cobalt Server running SAMBA which you wish
to
> backup does not appear in your "Network Neighborhood" (on the machine
doing
> the backups)?
>
> If so, then that may be a bit of a problem.
>
> I'd suggest you raise this issue with Dantz as I have always had my server
> and backup workstation on the same LAN.
>
> To the best of my knowledge using Retrospect to backup SAMBA shares really
> needs to have SMB support between the two machines.  If you use Retrospect
> Clients, then you are not limited to SMB, but Dantz currently only have a
> MacOS and Windows client.  Dantz have acknowledged that they are working
on
> a unix/linux client and I have heard a rumour that they have some Cobalt
> hardware in their development lab ... let us hope the result will be a
> Restrospect client for Cobalt to replace the existing Legato client.
>
> Cheers,  Malcolm
>
> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
>
>                        Information Alchemy Pty Ltd
>                              ACN 089 239 305
>                            Canberra, Australia
>
> Malcolm McLeary                                  Mobile:   0412 636 086
> Managing Director                                Email:  mim@xxxxxxxxxx
>
>      This message was sent using Outlook Express 5.0 for Macintosh.
>
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>