Re: [cobalt-users] cistron radius

[forhire@xxxxxxxxxxxxxxx (Randall Smith)]

What's up with "User-Service-Type = 2"? Do you have seperate profiles setup
on the max?

I use the following with my maxes:
DEFAULT DTC-NP-File = "users2"
        Service-Type = Framed-User,
        Framed-Protocol = PPP,
        Ascend-Assign-IP-Pool = 1,
        Ascend-Idle-Limit = 3600,
        Framed-Compression = Van-Jacobsen-TCP-IP,
        Framed-MTU = 576,
        Ascend-Link-Compression = Link-Comp-MS-Stac

One thing I discovered with DTC radius which I run is that the radius
dictionary didn't support all the Ascend commands, so you may want to see if
one of them is causing the code 2 issue.

Randy Smith
Tiger Mountain Technologies

----- Original Message -----
From: Adam Williams <adam@xxxxxxxxxxxxxx>
To: Randall Smith <forhire@xxxxxxxxxxxxxxx>
Cc: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Thursday, May 25, 2000 7:53 AM
Subject: Re: [cobalt-users] cistron radius


> Well, below is what I am getting.  I want to make sure its working before
> I switch the servers over:
>
> When I execute:
>
> [root@oldscribe /root]# radiusd -p 1645 -sfxxyz
> Starting - reading configuration files ...
> Ready to process requests.
>
> And then I connect with a testuser bob accoring to the FAQ:
>
> [adamw@clerk src]$ ./radtest bob bob oldscribe.intop.net:1645 0 effie2Zp
> Sending request to server oldscribe.intop.net, port 1645.
> radrecv: Reply from host 206.156.254.4 code=2, id=126, length=32
>     Reply-Message = "Hello, bob"
>
>
> radrecv: Request from host 206.156.254.12 code=1, id=126, length=87
>     User-Name = "bob"
>     Password = "\001\371\3652\354\243\376\243\360\301%\034}/\334\350"
>     NAS-Port = 0
> Received unknown attribute 26
> Received unknown attribute 26
>     Client-Id = 127.0.0.1
>   users: Matched bob at 1
>   auth: Local
> Sending Ack of id 126 to 206.156.254.12 (nas oldscribe.intop.net)
>     Reply-Message = "Hello, bob"
> Login OK: [bob/bob] (from nas oldscribe.intop.net/S0)
>
>
>
> That looks ok I assume, and then I connect with my user adamw:
>
> [adamw@clerk src]$ ./radtest adamw tical123 oldscribe.intop.net:1645 0
> effie2Zp
> Sending request to server oldscribe.intop.net, port 1645.
> radrecv: Reply from host 206.156.254.4 code=2, id=127, length=68
>     Service-Type = Framed-User
>     Framed-Protocol = PPP
>     Ascend-Bridge = Bridge-No
>     Ascend-Route-IP = Route-IP-Yes
>     Ascend-Assign-IP-Pool = 1
>     Ascend-Idle-Limit = 900
>     NAS-Port-Type = Async
>     Ascend-Maximum-Time = 28800
>
>
> radrecv: Request from host 206.156.254.12 code=1, id=127, length=89
>     User-Name = "adamw"
>     Password = "\360\356\361'"\2269\026L\2763\012\027\012^."
>     NAS-Port = 0
> Received unknown attribute 26
> Received unknown attribute 26
>     Client-Id = 127.0.0.1
>   users: Matched DEFAULT at 1
>   auth: System
> Sending Ack of id 127 to 206.156.254.12 (nas oldscribe.intop.net)
>     User-Service-Type = 2
>     Framed-Protocol = PPP
>     Ascend-Bridge = Bridge-No
>     Ascend-Route-IP = 1
>     Ascend-Assign-IP-Pool = 1
>     Ascend-Idle-Limit = 900
>     NAS-Port-Type = Async
>     Ascend-Maximum-Time = 28800
> Login OK: [adamw/tical123] (from nas oldscribe.intop.net/S0)
>
>
>
> Does everything look right?  I get the code=2's and I am not sure if thats
> what I am supposed to be getting.  If it all looks ok, please let me know
> :)  This is my first time to configure radius, so I might need a little
> hand holding :)
>
> Adam
>
> Respect my .Xauthoritah!
> _____________________________________________________________
> |Adam Williams                  adam@xxxxxxxxxx             |
> |Network Administrator          Vicksburg Chemical Company  |
> -------------------------------------------------------------
>
> On Thu, 25 May 2000, Randall Smith wrote:
>
> > I've compiled a couple different radius daemons on my box in testing the
> > features of different each. Maybe if you post the issue one of us can
point
> > you in the right direction.
> >
> > Randy
> >
> > ----- Original Message -----
> > From: Adam Williams <adam@xxxxxxxxxxxxxx>
> > To: <cobalt-users@xxxxxxxxxxxxxxx>
> > Sent: Wednesday, May 24, 2000 1:13 PM
> > Subject: [cobalt-users] cistron radius
> >
> >
> > > Hi,
> > >
> > > I'm wondering if anyone on the mail list here has any experience with
> > > cistron radius?  I'm having a configuration prbolem with mind, and was
> > > wondering if someone could email me.  I posted on the cistron mail
list
> > > but its not as active as the cobalt one, and I figure that atleast a
> > > couple of persons here have got it working.
> > >
> > > THanks,
> > > Adam
> > >
> > > Respect my .Xauthoritah!
> > > _____________________________________________________________
> > > |Adam Williams                  adam@xxxxxxxxxx             |
> > > |Network Administrator          Vicksburg Chemical Company  |
> > > -------------------------------------------------------------
> > >
> > >
> > > _______________________________________________
> > > cobalt-users mailing list
> > > cobalt-users@xxxxxxxxxxxxxxx
> > > To Subscribe or Unsubscribe, please go to:
> > > http://list.cobalt.com/mailman/listinfo/cobalt-users
> > >
> > >
> >
> >
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>