RE: [cobalt-users] Qube2 wont pass traffic

["Oren Teich" <teich@xxxxxxxxxx>]

if you have the interfaces set up, just backwards, this is the behavior that
you can expect. NAT and ip forwarding only work one way: primary ->
secondary.

Make sure that the private network, that isn't visiable from the outside is
hooked up to the primary interface, and your outside network, such as a DSL
or Cable modem is hooked up to the secondary interface.

Oren Teich

> -----Original Message-----
> From: cobalt-users-admin@xxxxxxxxxxxxxxx
> [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of
> fred@xxxxxxxxxxxxxxxx
> Sent: Sunday, January 09, 2000 12:40 PM
> To: cobalt-users@xxxxxxxxxxxxxxx
> Subject: Re: [cobalt-users] Qube2 wont pass traffic
>
>
> The primary and secondaries are correct. I know this because I
> have installed
> Qubes before. I confirmed that by the fact that I can communicate
> with the Qube
> and I can manage the Qube without a problem. It just won't let
> people browse
> the Internet or let me ping anything in the web, either by IP
> address or domain
> name.
>
> Fred
>
> Oren Teich wrote:
>
> > just a reality check - is the internal network on the primary
> interface and
> > the external on the secondary?
> >
> > Oren Teich
> >
> > > -----Original Message-----
> > > From: cobalt-users-admin@xxxxxxxxxxxxxxx
> > > [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx]On Behalf Of
> > > fred@xxxxxxxxxxxxxxxx
> > > Sent: Sunday, January 09, 2000 9:45 AM
> > > To: cobalt-users@xxxxxxxxxxxxxxx
> > > Subject: Re: [cobalt-users] Qube2 wont pass traffic
> > >
> > >
> > > Both are checked off to be active. Any other ideas?
> > >
> > > Fred
> > >
> > > Ivan PETROVIC wrote:
> > >
> > > > You need to have IP Forwarding enabled.
> > > > If not traffic cannot pass between the network interfaces.
> > > > We had a problem with NAT when unchecked no access to the web,
> > > > so we had to turn it back on.
> > > > With IP forwarding enabled and NAT enabled we have no problem.
> > > >
> > > > ----- Original Message -----
> > > > From: <fred@xxxxxxxxxxxxxxxx>
> > > > To: <cobalt-users@xxxxxxxxxxxxxxx>
> > > > Sent: Sunday, January 09, 2000 6:24 PM
> > > > Subject: [cobalt-users] Qube2 wont pass traffic
> > > >
> > > > > I just installed a new Qube2. You can ping the server over
> > > the Internet,
> > > > and you
> > > > > can ping the server internally, but the Qube2 won't pass
> > > traffic through
> > > > it. The
> > > > > NAT and IP forwarding boxes are checked off.
> > > > >
> > > > > Has anyone seen this before? Any ideas?
> > > > >
> > > > > Fred Taub
> > > > > fred@xxxxxxxxxxxxxxxx
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > cobalt-users mailing list
> > > > > cobalt-users@xxxxxxxxxxxxxxx
> > > > > http://list.cobalt.com/mailman/listinfo/cobalt-users
> > > > >
> > > >
> > > > _______________________________________________
> > > > cobalt-users mailing list
> > > > cobalt-users@xxxxxxxxxxxxxxx
> > > > http://list.cobalt.com/mailman/listinfo/cobalt-users
> > >
> > >
> > > _______________________________________________
> > > cobalt-users mailing list
> > > cobalt-users@xxxxxxxxxxxxxxx
> > > http://list.cobalt.com/mailman/listinfo/cobalt-users
> > >
> >
> > _______________________________________________
> > cobalt-users mailing list
> > cobalt-users@xxxxxxxxxxxxxxx
> > http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>