[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [cobalt-users] "Link" LED on front of RaQ3

Hi, Chris!...

> > Does anyone else's "link" LED on the front of the RaQ3 light up?  We
> > just got a bunch of RaQ3 systems (not the RaQ3i), and I just noticed
> > that the "link" LED is not lit up.  This looks weird, becuase it is lit
> > on our RaQ and RaQ2 systems.
> >
> > And yes, they are connected to an ethernet switch (I can reach the web
> > interface just fine).
> >
> > The "100" LED will light up if you plug the RaQ3 into a 100MB ethernet
> > port, but the "link" LED still stays dark.
> >
> > I wonder if someone mis-wired the RaQ3 and connected the "link" LED to
> > where the second ethernet port would be on the RaQ3i.

make shure that the leds on the rear panel (back of the raq) work
normally. if check out this and leds is ok, maybe you have the one of
the front wrong. if this is, contact your dealer, because the link led
on the front is failed.

sorry, but i have not a two eth raq3 yet, and do not know when the ligth
work on the front, but i think that the link led on the front will ligth
with the primary eth link signal.

hope this help.
 
best regards and electronics greetings from madrid, spain
-- 
------------------------------------------------------------------------
Vicente Sanchez              |                         MERCURIO CAT S.L.
Technical Manager            |        Hi-End Internet Solutions Provider
E-Mail: visan@xxxxxxxxxxxx   |         P.O.Box 28011-E28080-Madrid-Spain
URL: http://www.mercurio.net | Fax:+34 913 602 175-Phone:+34 913 602 055