RE: [cobalt-users] Package Install order wrong

["Mike Jenkins" <cobalt-users@xxxxxxxxxxxxx>]

> On Tue, 1 Jul 2003, Mike Jenkins wrote:
> <snip>
> > Thanks for your help.
> > No difference, I'm afraid. The 80Gb disks were working 
> until I applied 
> > the Kernel from nuonce, and it still boots fine if I choose 
> boot from 
> > rom at startup.
> 
> That's odd!
> Maybe hook up a null-modem cable and see where it is hanging.
> 

Here's the part from stage one boot:

ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: chipset revision 193
ALI15X3: 100% native mode on irq 14
    ide0: BM-DMA at 0xfdd0-0xfdd7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfdd8-0xfddf, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380011A, SN=5JV00NYN, FWREV=3.06, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: ST380011A, SN=5JV00NBW, FWREV=3.06, ATA DISK drive
ide0 at 0xfdf8-0xfdff,0xfdf6 on irq 14
ide1 at 0xfde8-0xfdef,0xfde6 on irq 15
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63,
UDMA(33)
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63,
UDMA(33)
Partition check:
 hda: hda1 hda2 hda3 hda4
 hdc: hdc1 hdc2 hdc3 hdc4


On the second stage boot:

ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: chipset revision 193
ALI15X3: 100% native mode on irq 14
    ide0: BM-DMA at 0xfdd0-0xfdd7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfdd8-0xfddf, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380011A, SN=5JV00NYN, FWREV=3.06, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: ST380011A, SN=5JV00NBW, FWREV=3.06, ATA DISK drive
ide0 at 0xfdf8-0xfdff,0xfdf6 on irq 14
ide1 at 0xfde8-0xfdef,0xfde6 on irq 15
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33)
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33)
Partition check:
 hda:

and there it hangs - boots fine from ROM.

Mike