[cobalt-users] Running 550 O/S on a XTR

["BlackSun: rm-r-f" <rm-r-f@xxxxxxxxxxx>]

Hello all!

I've been attempting to get the 550 O/S to run on an XTR (2x40GB).  I was
able to flash the ROM successfully to the 2.9.34 version, and install the
550 O/S, but upon first boot it starts to load the CCE engine, and reboots?

I've gone as far as re-flashing the ROM, removing the second hard drive, and
re-installing the 550 O/S, and I monitored the entire installation with the
console port... Still no go, it still reboots!

While surfing the list I found:

"I can extend that further by telling you that the RaQ550 software runs
perfectly on a RaQXTR as well and even detects whether it has 1,2,3
or 4 drives 

-- http://list.cobalt.com/pipermail/cobalt-users/2002-November/081879.html
(Gavin)"  *sigh*  I wish mine worked perfectly...


Any assistance would be greatly appreciated.  Feel free to email me directly
at rm-r-f@xxxxxxxxxxx

Thanks,


-- Chris (Zeke)

----------------------------------------------------------------------------
P.S.  I've been posting my notes and such regarding running the 550 O/S on
RAQ3's and RAQ4's on Bruce Timberlake's http://www.cobaltfaqs.com.

And a special thanks to Gerald at http://www.frontstreetnetworks.com for
helping me breath new life (mhz) into our RAQ3's!