RE: [cobalt-users] Using the Secondary NIC to connect Two RaQ4r's

["Derek Schwab" <derek@xxxxxxxxxxxx>]

Um, 192.168.0.100 and 192.168.0.200 with netmask 255.255.255.0 ARE on
the same network.  Those two addresses can talk to each other fine.

	-Derek


> -----Original Message-----
> From: cobalt-users-admin@xxxxxxxxxxxxxxx 
> [mailto:cobalt-users-admin@xxxxxxxxxxxxxxx] On Behalf Of Josh Kuperman
> Sent: Friday, February 14, 2003 12:38 PM
> To: cobalt-users@xxxxxxxxxxxxxxx
> Subject: Re: [cobalt-users] Using the Secondary NIC to 
> connect Two RaQ4r's
> 
> 
> I'm a little bit confused about what your doing, but for the 
> two machines to talk to each other they'd need to be on the 
> same network. In the example below you have them on two 
> different networks, change the IPs, or just change the 
> netmask to 255.255.0.0 and they are on the same network.
> 
> On Wed, Feb 12, 2003 at 10:47:48AM -0600, COMPUTICA wrote:
> > 
> > I have two Raq4r's connected to each other using the secondary NIC 
> > slot.
> > 
> > Now, how do I get raqbackup.sh to use that NIC to copy the backup's 
> > between each server to each other?
> > 
> > I have set-up the secondary network on each server, giving them 
> > internal IP's.
> > 
> > One is 192.168.0.100 and the other is 192.168.0.200, both with a 
> > subnetmask of 255.255.255.0
> > 
> > Any pointers, suggestions, etc. appreciated!
> > 
> > -----
> > Best Regards,
> > Ryan Hnetka - President/Owner
> > COMPUTICA - http://www.computica.net
> > 
> > _____________________________________
> > cobalt-users mailing list
> > cobalt-users@xxxxxxxxxxxxxxx
> > To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to: 
> > http://list.cobalt.com/mailman/listinfo/cobalt-users
> 
> -- 
> Josh Kuperman                       
> josh@xxxxxxxxxxxxxxxxxx
> 
> _____________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to: 
> http://list.cobalt.com/mailman/listinfo/cobalt> -users
>