RE: [cobalt-users] How to install PHP 4.3.0 in a RaQ4i

["Montz, James C. (James Tower)" <JCMontz@xxxxxxxxxxxxxx>]

http://www.rpmfind.net

________________________
James C. Montz    RHCE


-----Original Message-----
From: José Luis Chafardet Grimaldi [mailto:joseluis@xxxxxxxxxxxxxxxx] 
Sent: Monday, February 10, 2003 8:57 PM
To: cobalt-users@xxxxxxxxxxxxxxx
Subject: Re: [cobalt-users] How to install PHP 4.3.0 in a RaQ4i


Where do i can get all those RPM's ??? please thanks a lot, i have done
installed php without gd but gd is a must for me because some pages generate
graphics on the fly...

Please could you send me the address for the rpm's ?

thanks a lot
----- Original Message -----
From: "Montz, James C. (James Tower)" <JCMontz@xxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Monday, February 10, 2003 5:14 PM
Subject: RE: [cobalt-users] How to install PHP 4.3.0 in a RaQ4i


Hope this helps a bit, here is the process I went thorough to enable PHP
4.3.0 & GD2 on our Raq4i

===========================================================================

Here are the steps taken to get PHP 4.3.0 installed on the Cobalt Raq4r

This stemmed from client need to have GD 2 support for image preview
generation.

It was rather involved, as several packages needed to be updated:

freetype-2.0.3-7.i386.rpm
freetype2-2.0.1-ximian.1.i386.rpm
freetype2-devel-2.0.1-ximian.1.i386.rpm
freetype-devel-2.0.3-7.i386.rpm
libjpeg-6b-16.i386.rpm
libjpeg-devel-6b-16.i386.rpm
libpng-1.0.14-0.7x.3.i386.rpm
libpng-devel-1.0.14-0.7x.3.i386.rpm
libstdc++-2.96-112.7.2.i386.rpm

GD Obtained from PLD Distribution RPM's
gd-2.0.1-7.i386.rpm
gd-2.0.1-7.src.rpm
gd-devel-2.0.1-7.i386.rpm
gd-progs-2.0.1-7.i386.rpm
gd-static-2.0.1-7.i386.rpm

And PHP 4.3.0 was from Source
php-4.3.0.tar.gz

Make sure you backup the following files before compiling PHP:
WARNING!: The PHP make install will overwrite httpd.conf, and you will loose
Raq specific configuration information and settings!

/etc/httpd/conf/httpd.conf
/usr/lib/apache/libphp4.so

Following is the configure script used, and build commands. Source extracted
to /usr/local/src/


[root php-4.3.0]# cp /etc/httpd/conf/httpd.conf
/etc/httpd/conf/httpd.conf.raq

[root php-4.3.0]# cp /usr/lib/apache/libphp4.so
/usr/lib/apache/libphp4.so.raq

[root php-4.3.0]# ./configure --prefix=/usr --with-apxs=/usr/sbin/apxs
--with-exec-dir=/usr/bin
 --with-libdir=/usr/lib --with-zlib --with-exif --with-gd
--enable-gd-native-ttf --with-jpeg --
with-png --with-freetype-dir=/usr/include/freetype2 --with-ttf
--with-regex=system --with-dba -
-with-gdbm --with-mbstring --with-mbstr-enc-trans --with-gettext=/usr
--with-interbase=shared -
-with-mysql=/usr --with-pgsql=shared --with-pdflib=shared --enable-ftp
--with-ldap --with-imap-
ssl --enable-xml --enable-trans-sid --enable-inline-optimization
--enable-track-vars --enable-w
ddx=shared --enable-mm=shared --enable-magic-quotes --disable-debug
--enable-safe-mode --with-c
onfig-file-path=/etc/httpd

[root php-4.3.0]# make
[root php-4.3.0]# make install
[root php-4.3.0]# cp /etc/httpd/conf/httpd.conf.raq
/etc/httpd/conf/httpd.conf

Then just restart the web server!


PHP Configure options in readable format:
./configure
--prefix=/usr
--with-apxs=/usr/sbin/apxs
--with-exec-dir=/usr/bin
--with-libdir=/usr/lib
--with-zlib
--with-exif
--with-gd
--enable-gd-native-ttf
--with-jpeg
--with-png
--with-freetype-dir=/usr/include/freetype2
--with-ttf
--with-regex=system
--with-dba
--with-gdbm
--with-mbstring
--with-mbstr-enc-trans
--with-gettext=/usr
--with-interbase=shared
--with-mysql=/usr
--with-pgsql=shared
--with-pdflib=shared
--enable-ftp
--with-ldap
--with-imap-ssl
--enable-xml
--enable-trans-sid
--enable-inline-optimization
--enable-track-vars
--enable-wddx=shared
--enable-mm=shared
--enable-magic-quotes
--disable-debug
--enable-safe-mode
--with-config-file-path=/etc/httpd


FYI: I could not get 2 componenets that were in the original Raq config to
compile.
DB3
Curl

============================================================================
=========
________________________
James C. Montz    RHCE


-----Original Message-----
From: José Luis Chafardet G. [mailto:joseluis@xxxxxxxxxxxxxxxx]
Sent: Monday, February 10, 2003 1:35 PM
To: Cobalt list
Subject: FW: [cobalt-users] How to install PHP 4.3.0 in a RaQ4i
Importance: High


Could some one point me on how to install PHP 4.3.0 in a RaQ4i With
posix, mysql, bz2, gzip, gd, and all the common stuff.

I have downloaded the tar of php 4.0.3 and uncompressed it
Just doesn't know how to ./configure it

I'm following:

http://i4net.tv/marticle/get.php?action=getarticle&articleid=20

But seems to not work

Thanks in advance


_____________________________________
cobalt-users mailing list
cobalt-users@xxxxxxxxxxxxxxx
To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to:
http://list.cobalt.com/mailman/listinfo/cobalt-users

_____________________________________
cobalt-users mailing list
cobalt-users@xxxxxxxxxxxxxxx
To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to:
http://list.cobalt.com/mailman/listinfo/cobalt-users


_____________________________________
cobalt-users mailing list
cobalt-users@xxxxxxxxxxxxxxx
To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to:
http://list.cobalt.com/mailman/listinfo/cobalt-users