[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[cobalt-users] RaQ 4 Falling Over
- Subject: [cobalt-users] RaQ 4 Falling Over
- From: "Gary Pacitti" <gary.pacitti@xxxxxxxxxxxxxxx>
- Date: Wed Feb 5 01:56:01 2003
- List-id: Mailing list for users to share thoughts on Sun Cobalt products. <cobalt-users.list.cobalt.com>
Sorry posted earlier in wrong thread OOps !
I have a problem with a RaQ4 continually falling over at 4.40am
everyday. I reckon that this was due to daily logrotate, and lack of
memory.I installed more mem to increase from 256 to 512. I then run
cron.dailymanually and success. However next cron.daily fell over again.
The server rebootsautomatically and everything comes back to life except
Chillisoft, whichrequires a restart from command line.
I have made the following observations:
1. When cron.daily runs mem usage rises from 230 to 512 and then
staysthat way until next reboot.
2.The Kernel log is filled with a huge amount of denial to port 137 (see
snap shot)
Feb 5 01:16:38 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62027
F=0x0000 T=115(#78)
Feb 5 01:16:40 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62028
F=0x0000 T=115(#78)
Feb 5 01:17:42 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62038
F=0x0000 T=115(#78)
Feb 5 01:17:43 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62045
F=0x0000 T=115(#78)
Feb 5 01:17:45 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62046
F=0x0000 T=115(#78)
Feb 5 01:18:46 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62179
F=0x0000 T=115(#78)
Feb 5 01:18:48 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62186
F=0x0000 T=115(#78)
Feb 5 01:18:49 server1 kernel: Packet log: input DENY eth0
PROTO=17213.123.215.216:137 212.78.70.225:137 L=78 S=0x00 I=62187
F=0x0000 T=115(#78)
Can anyone please advise me on a potential solution. Also why
doeschilisoft not restart on reboot ?
Ps.I have searched the archives and have seen lots of posts re problems
with log rotate, however I seem to be going round and round in
circles,so any advice is much appreciated.
Gary Pacitti