Re: [cobalt-users] Two secure server certs on a raq4

["www.raqtalk.com" <mailinglists@xxxxxxxxxxx>]

Hi Scott,

Well.. The RAQ4 seems to need a DEDICATED IP per Certificate,
meaning you can have 10 sites on 1 ip, however, only ONE site of those 1 (on
that IP) can have an SSL certificate.

What you want to do is setup the following
-example-
securedomain1.com - IP: 127.0.0.1
securedomain2.com - IP: 127.0.0.2

note: Use your own domains and IPs!
But not the difference in domains and IPs!! They HAVE to be different or the
RAQ won't take it...
Now, when you've added the domains, click the green wrench nexto it, then
ont he left, click "SSL Settings"

That's where you configure the SSL cert. Do this for securedomain1.com, and
when done, click "Server Management" in the lower left.
Then, click the wrench nexto securedomain2.com and do the same....

Good luck!
    www.raqtalk.com



----- Original Message -----
From: "scott" <scott@xxxxxxxxxxxxxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Tuesday, January 28, 2003 12:44 AM
Subject: [cobalt-users] Two secure server certs on a raq4


>
> Hi there
> I have a raq4 with two ips setup. Every site seems to be on only 1 of
> the ip's. I was told you can use the other IP to run a second Secure
> server.
> Can anyone point me in the right direction of setting up a raq4 with two
> separate sites both with there own cert!
> Best regards
> Scott
>
> _____________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To subscribe/unsubscribe, or to SEARCH THE ARCHIVES, go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>