[cobalt-users] Qube 2 Firewall Setup

[Steven Tincher <stincher@xxxxxxxxxxxxxxxxxxxxxxx>]

I am trying to set up a customer's Qube 2 firewall for PCAnyWhere 10.5.
According to the software documentation, confirmed by testing on a different
firewall/router, the software needs 5631 TCP, and 5632 UDP.  The workstation
IP Address is 192.168.0.52.  The Qube 2 Primary interface is 192.168.0.10.
The workstation is to be used as a PCAnyWhere host.

I have tried the following combinations:

1)  Allow Any Source IP, Source Port 5631, Destination IP 192.168.0.52,
Destination Port 5631, TCP
2)  Allow Any Source IP, Source Port 5632, Destination IP 192.168.0.52,
Destination Port 5632, UDP
3)  Allow Source IP <Public IP>/24, Source Port Any, Destination IP Any,
Destination Port 1-65535, TCP
4)  Allow Source IP <Public IP>/24, Source Port Any, Destination IP Any,
Destination Port 1-65535, UDP
5)  Deny Any Source IP, Any Source Port, Any Destination IP, Destination
Port Any, ALL

I have also tried a simplified version:

1)  Allow Any Source IP, Source Port 5631, Destination IP 192.168.0.52,
Destination Port 5631, TCP
2)  Allow Any Source IP, Source Port 5632, Destination IP 192.168.0.52,
Destination Port 5632, UDP
3)  Allow Any Source IP, Any Source Port, Any Destination IP, Any
Destination Port, ALL

Does anyone have experience with this?

Steven Tincher