[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[cobalt-users] 2.4 kernel on Qube3

I successfully upgraded the Qube's firmware to
2.3.40 per "README.2.3.40.rom .   Then I tried to install
  kernel-2.4.16C2_III-1.i386.rpm along with the
three fixes you outline in "README.gen_III".
That system almost successfully boots, but gets
stuck as shown below:

I also tried building a kernel from sources
and ended up with similar hdc/ide_dmaproc errors.

Got any suggestions?  Need any more details?
Thanks
-David Clements
---------------------------------
...
Setting clock (utc): Tue Jun 25 14:28:31 MDT 2002 Tue Jun 25 14:28:31 MDT 2002 

Enabling swap space
INIT: Entering runlevel: 3
Starting system logger:  syslogd
Starting kernel logger:  klogd
Starting capabilities
Starting cced:  cced
Running CCE constructors:
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
---------------------------------------------
Full boot log:
---------------------------------------------

connected
~
         Cobalt Networks, Inc. - Connecting the Dots
                  Firmware version 2.3.40

Current date: Jun 25 20:25:23 UTC 2002
ROM build info: Tue Jun 19 01:18:56 PDT 2001 unicron.cobalt.com
System serial number: invalid csum!
Memory found: 512 MB
Initializing I2C bus: done
Scanning PCI bus: done
Initializing IDE: waiting to spinup second channel...done
  IDE 0 master: found
Initializing SCSI: done
Initializing ethernet: 2 ethernet controllers installed - done
National Semiconductor DP83815 Found at port 0x6200, MAC: 00:10:e0:05:37:4e National Semiconductor DP83815 Found at port 0x6300, MAC: 00:10:e0:05:37:4d 
Initializing flash: done
  Flash bank 0: AMD AM29F080B 1MB (1:d5)
  Flash bank 1: not installed.
Initializing USB: done
Mounting rom_fs: done

Initializing i18n - language "en": done

Press spacebar to enter ROM mode
Booting default method - From disk

First stage kernel: Decompressing - done
Second stage kernel: Decompressing - done
Linux version 2.4.16C2_III (root@xxxxxxxxxxxxxxxxxx) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Tue Dec 18 20:38:11 PST 2001 
BIOS-provided physical RAM map:
 BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e801: 0000000000100000 - 0000000020000000 (usable)
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,115200 ip=off
Initializing CPU#0
Detected 448.220 MHz processor.
Calibrating delay loop... 894.56 BogoMIPS
Memory: 513504k/524288k available (1435k kernel code, 10396k reserved, 315k data, 212k init, 0k highmem) 
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Enabling new style K6 write allocation for 512 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: AMD-K6(tm)-III Processor stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: AMD K6
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
SGI XFS with ACLs, EAs, realtime, quota, no debug enabled
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-proc.o version 2.6.1 (20010825)
i2c-piix4.o version 2.6.2 (20011118)
i2c-piix4.o: Error: Can't detect PIIX4 or compatible device!
i2c-piix4.o: Device not detected, module not inserted.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled 

ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Non-volatile memory driver v1.2
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: chipset revision 193
ALI15X3: 100% native mode on irq 14
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340810A, SN=5FB2G8N7, FWREV=3.39, ATA DISK drive
hdc: ST340810A, SN=5FB2H0LJ, FWREV=3.39, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 14
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(33)
hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(33)
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
Partition check:
 hda: hda1 hda2 < hda5 hda6 > hda3 hda4

 hdc:ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 hdc1 hdc2 <ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 hdc5ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 hdc6 > hdc3 hdc4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 14, function 0
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x4 on pci bus 0 device 14 function 0 irq 12
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3c-20010512
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :   424.400 MB/sec
   32regs    :   362.800 MB/sec
   pII_mmx   :   815.600 MB/sec
   p5_mmx    :   775.600 MB/sec
raid5: using function: pII_mmx (815.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
 [events: 00000019]
 [events: 00000000]
md: invalid raid superblock magic on hda5
md: hda5 has invalid sb, not importing!
md: could not import hda5!

 [events: 00000019]
 [events: 00000019]
 [events: 00000019]
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 [events: 00000019]
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 [events: 00000000]
md: invalid raid superblock magic on hdc5
md: hdc5 has invalid sb, not importing!
md: could not import hdc5!
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 [events: 00000019]


ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 [events: 00000019]
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
 [events: 00000019]
md: autorun ...
md: considering hdc4 ...
md:  adding hdc4 ...
md:  adding hda4 ...
md: created md4
md: bind<hda4,1>
md: bind<hdc4,2>
md: running: <hdc4><hda4>
md: hdc4's event counter: 00000019
md: hda4's event counter: 00000019
md: md4: raid array is not clean -- starting background reconstruction
md: RAID level 1 does not need chunksize! Continuing anyway.
md4: max total readahead window set to 124k
md4: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdc4 operational as mirror 1
raid1: device hda4 operational as mirror 0
raid1: raid set md4 not clean; reconstructing mirrors
raid1: raid set md4 active with 2 out of 2 mirrors
md: updating md4 RAID superblock on device
md: hdc4 [events: 0000001a]<6>(write) hdc4's sb offset: 36872064

md: syncing RAID array md4
md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc.
md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction. 
md: using 124k window, over a total of 36872064 blocks.
md: hda4 [events: 0000001a]<6>(write) hda4's sb offset: 36872064
md: considering hdc3 ...
md:  adding hdc3 ...
md:  adding hda3 ...
md: created md3
md: bind<hda3,1>
md: bind<hdc3,2>
md: running: <hdc3><hda3>
md: hdc3's event counter: 00000019
md: hda3's event counter: 00000019
md: md3: raid array is not clean -- starting background reconstruction
md: RAID level 1 does not need chunksize! Continuing anyway.
md3: max total readahead window set to 124k
md3: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdc3 operational as mirror 1
raid1: device hda3 operational as mirror 0
raid1: raid set md3 not clean; reconstructing mirrors
raid1: raid set md3 active with 2 out of 2 mirrors
md: updating md3 RAID superblock on device
md: hdc3 [events: 0000001a]<6>(write) hdc3's sb offset: 512000
md: delaying resync of md3 until md4 has finished resync (they share one or more physical units) 
md: hda3 [events: 0000001a]<6>(write) hda3's sb offset: 512000

md: considering hdc6 ...
md:  adding hdc6 ...
md:  adding hda6 ...
md: created md6
md: bind<hda6,1>
md: bind<hdc6,2>
md: running: <hdc6><hda6>
md: hdc6's event counter: 00000019
md: hda6's event counter: 00000019
md: md6: raid array is not clean -- starting background reconstruction
md: RAID level 1 does not need chunksize! Continuing anyway.
md6: max total readahead window set to 124k
md6: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdc6 operational as mirror 1
raid1: device hda6 operational as mirror 0
raid1: raid set md6 not clean; reconstructing mirrors
raid1: raid set md6 active with 2 out of 2 mirrors
md: updating md6 RAID superblock on device
md: hdc6 [events: 0000001a]<6>(write) hdc6's sb offset: 131456
md: delaying resync of md6 until md4 has finished resync (they share one or more physical units) 
md: hda6 [events: 0000001a]<6>(write) hda6's sb offset: 131456
md: considering hdc1 ...
md:  adding hdc1 ...
md:  adding hda1 ...
md: created md1
md: bind<hda1,1>
md: bind<hdc1,2>
md: running: <hdc1><hda1>
md: hdc1's event counter: 00000019
md: hda1's event counter: 00000019
md: md1: raid array is not clean -- starting background reconstruction
md: RAID level 1 does not need chunksize! Continuing anyway.

md1: max total readahead window set to 124k
md1: 1 data-disks, max readahead per data-disk: 124k
raid1: device hdc1 operational as mirror 1
raid1: device hda1 operational as mirror 0
raid1: raid set md1 not clean; reconstructing mirrors
raid1: raid set md1 active with 2 out of 2 mirrors
md: updating md1 RAID superblock on device
md: hdc1 [events: 0000001a]<6>(write) hdc1's sb offset: 1536064
md: delaying resync of md1 until md4 has finished resync (they share one or more physical units) 
md: hda1 [events: 0000001a]<6>(write) hda1's sb offset: 1536064
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 212k freed
modprobe: Note: /etc/modules.conf is more recent than /lib/modules/2.4.16C2_III/modules.dep 
modprobe: modprobe: Can't locate module char-major-4
INIT: version 2.77 booting
Activating swap partitions Adding Swap: 131448k swap-space (priority -1)

Setting hostname localhost

Checking root filesystem
e2fsck 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
/dev/md1: clean, 32620/385024 files, 592466/1536064 blocks
ok
mount: proc already mounted
Remounting root filesystem in read-write mode
Finding module dependencies
Starting up RAID devices...

-- System configuration........... /etc/raidtab
   /dev/md1: </dev/hda1> </dev/hdc1>
   /dev/md3: </dev/hda3> </dev/hdc3>
   /dev/md4: </dev/hda4> </dev/hdc4>
   /dev/md6: </dev/hda6> </dev/hdc6>

-- System status.................. /proc/mdstat
   /dev/md1: </dev/hdc1> </dev/hda1>
   /dev/md3: </dev/hdc3> </dev/hda3>
   /dev/md4: </dev/hdc4> </dev/hda4>
   /dev/md6: </dev/hdc6> </dev/hda6>

-- RAID status.................... OK


Checking filesystems
e2fsck 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
/dev/md3: clean, 167/128016 files, 25162/512000 blocks
e2fsck 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
/dev/md4: clean, 1086/9218048 files, 1884370/36872064 blocks
ok

Mounting local filesystems
Setting clock (utc): Tue Jun 25 14:28:31 MDT 2002 Tue Jun 25 14:28:31 MDT 2002 

Enabling swap space
INIT: Entering runlevel: 3
Starting system logger:  syslogd
Starting kernel logger:  klogd
Starting capabilities
Starting cced:  cced
Running CCE constructors:
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt
ide_dmaproc: chipset supported ide_dma_lostirq func only: 13
hdc: lost interrupt