Re: [cobalt-users] Raq2 Memory Height Spec

["DutchNet Support" <support@xxxxxxxxxxxxx>]

Crucial specs for Raq2 simms

http://www.crucial.com/crucial/pvtcontent/memorytype.asp?memtype=72-pinSIMM

The number of black components on a 72-pin SIMM may vary, but they always
have exactly 72 pins. 72-pin SIMMs are approximately 4.25" long and 1" high,
though the heights may vary. They have one notch on the bottom left and one
notch in the center of the module.

So they should fit perfectly well

regards
Erik

DutchNet Internet
----- Original Message -----
From: "Peter Masloch" <peter@xxxxxxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Monday, June 17, 2002 7:55 PM
Subject: RE: [cobalt-users] Raq2 Memory Height Spec


> I ordered memory (1x128MB) from Crucial for my Raq2 two weeks
> ago and it fits perfectly.
> Peter
>
>
> >I know this is a dated Q, but anyone have the height spec for
> >Raq2 SIMMS. I
> >know the what, (3.3 EDO 72-pin).. I need the height thing.
> >Having trouble
> >finding it.
> >
> >Did find:
> >
> >[original] RaQ can access up to 256 MB of memory. The memory
> >type is the same as
> >the [original] Cobalt Qube: 5V, 60ns, 72-pin EDO non parity
> >SIMMs. Be aware
> >that there is a memory module 1.15" height limit."
> >
> >and
> >
> >The Qube 2 and RaQ 2 lines use 3.3v EDO memory SIMMs.
> >But is 1 1/4" too tall for a Raq2 ??  (Which is what Crucial
> >just sent me).
> >Thought I'd ask before undoing all 10 screws :-(
> >
> >Thanks
> >
> >Les Connally
> >lesliec@xxxxxxxxxxxxx
> >
> >
> >_______________________________________________
> >cobalt-users mailing list
> >cobalt-users@xxxxxxxxxxxxxxx
> >To Subscribe or Unsubscribe, please go to:
> >http://list.cobalt.com/mailman/listinfo/cobalt-users
> >
> >
>
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>
>