[cobalt-users] Raq2 Memory Height Spec.. Answer??

[lesliec@xxxxxxxxxxxxx (Leslie Connally)]

A:

1.15 I think is the correct spec. The Raq2 SIMM slots are completely
vertical, and the 1.25 (1_1/4") sticks Crucial sent are exactly? (nano-inch
over) flush with the case sides.

I am going to try the desparation approach though, and laid electrical tape
on the top edge of the SIMMS, and I am thinking/hoping the lid, if
touching, is not stressing  the motherboard.

Les

But certainly, FYI Crucial is selling out-of-spec memory :-(
(price is good though: $60 for a 128 MB.. unless it breakes my Raq !!)


>
>
>I know this is a dated Q, but anyone have the height spec for Raq2 SIMMS.
>I know the what, (3.3 EDO 72-pin).. I need the height thing. Having
>trouble finding it.
>
>Did find:
>
>[original] RaQ can access up to 256 MB of memory. The memory type is the
>same as
>the [original] Cobalt Qube: 5V, 60ns, 72-pin EDO non parity SIMMs. Be
>aware that there is a memory module 1.15" height limit."
>
>and
>
>The Qube 2 and RaQ 2 lines use 3.3v EDO memory SIMMs.
>But is 1 1/4" too tall for a Raq2 ??  (Which is what Crucial just sent
>me). Thought I'd ask before undoing all 10 screws :-(
>
>Thanks
>
>Les Connally
>lesliec@xxxxxxxxxxxxx