Re: [cobalt-users] Debian testing/3.0 Installation Procedure on RaQ 3

[Jeff Lasman <jblists@xxxxxxxxxxxxx>]

Robert Gash wrote:

> Please note that one of the other users on this list attempted to install
> RedHat 7.x, but all of its packages are built with  P2+ class systems in
> mind, which the RaQ is not (it is a 586/Pentium class system utilizing an
> AMD 6x86 processor)

We've got lots of RedHat 7.2 installations; some of them on AMD K6
processors.  Red Hat says their linux is optimized for x386 processors,
unless they've changed recently.

> USE THIS GUIDE AT YOUR OWN RISK!  THE INSTRUCTIONS INCLUDED IN THIS
> DOCUMENT WERE COMPILED TO ASSIST OTHER USERS WITH THEIR INSTALLATION
> NEEDS, AND NO WARRANTY OF ANY KIND IS PROVIDED OR IMPLIED.  BY USING THE
> CONTENTS OF THIS MESSAGE YOU EXPRESSLY RELEASE THE AUTHOR AND ALL
> AFFILIATED PARTIES FROM ANY LIABILITY OF ANY KIND.  IF YOU DO NOT AGREE TO
> THESE TERMS, DO NOT PROCEED.  ADDITIONALLY, NO SUPPORT WILL BE PROVIDED
> SHOULD YOU HAVE ADDITIONAL QUESTIONS NOT ANSWERED IN THIS DOCUMENT.  IT IS
> NOT MY JOB TO SUPPORT RAQ PRODUCTS OR RAQ INSTALLATION QUESTIONS.  IF YOU
> HAVE QUESTIONS, POST THEM TO THE APPROPRIATE MAILING LIST/FORUM.
> 
> Installing Debian 3.0 on Cobalt RaQ 3+ (x86-based) Systems

Thanks for giving us this valuable information.

Jeff
-- 
Jeff Lasman <jblists@xxxxxxxxxxxxx>
Linux and Cobalt/Sun/RaQ Consulting
nobaloney.net
P. O. Box 52672, Riverside, CA  92517
voice: (909) 778-9980  *  fax: (702) 548-9484