Fwd: Re: [cobalt-users] RaQ1 Reload Problem

[Gerald Waugh <gwaugh@xxxxxxxxxxxxxxxxxxxxxxx>]

----------  Forwarded Message  ----------
Subject: Re: [cobalt-users] RaQ1 Reload Problem
Date: Thu, 14 Mar 2002 22:49:46 -0600
From: Bob_G7 <bob_g7@xxxxxxxxxx>


How can I test the card to make sure it's operating at 100 Mb/s?

----- Original Message -----
From: "Gerald Waugh" <gwaugh@xxxxxxxxxxxxxxxxxxxxxxx>
To: "Bob_G7" <bob_g7@xxxxxxxxxx>
Sent: Thursday, March 14, 2002 8:39 PM
Subject: Re: [cobalt-users] RaQ1 Reload Problem


> On Thursday 14 March 2002 09:34 pm, Bob_G7 wrote:
> > I'm using a 3com 3c905-tx, it just won't talk to the RaQ, but it can
talk
> > to the network.
>
> Precisely, why I was asking you to double check,
> If you search the archives, you will find that you are
> experiencing a common problem.
>
> The card needs to operate at 100 Mb/s to work (does it?)
>
> The cards listed below contain 3 3COM 3c905 cards
> two work and one doesn't.
>
>
> "The following equipment has been tested and does work
> 3COM 3c905-TX Rev C Fast Ethernet PCI
> 3COM 3c905-TX
> Netgear FA310TX ethernet card (Tulip 21143-based)
> Intel Etherpro 100B"
>
> "The folowing equipment has been tested and does not work
> 3COM 3c905B-TX-NM only works at 10 Nb/s
> SOHOware Fast PCI
> 3COm 3c905B ethernet card
> Generic DEC Tulip ethernet interface identified by the kernel as "lite-On
> 82c168 PNIC"
--
Gerald Waugh