RE: [cobalt-users] Cobalt Raq's and UPS.

["Matt Brown" <matt@xxxxxxxxxxxxxxxxxx>]

> > > I was looking through the data sheets for Raq3i, Raq4i & Raq4r
> > > and it states UPS support (which I presume is Uninterruptible
> > > Power source/supply)
>
> Yes, you are correct.
>
> > > looking through the knowledge base I cant find any reference
> > > on how to set it up.
>
> I have sent a request for that to be added to the KB. Thanks for the
> feedback.
>
> > > Has anyone connected a ups to a Raq ? if so how ? (and I
> > > don't mean connect the RS232 cable :-) )
>
> That's all there is to it - plug the RaQ into the UPS, and connect the
> serial cable from the UPS to the 2nd serial port on the RaQ.  Then
> install the UPS software (it did come with some, right?) on the RaQ.
> Voila.

<snip>

Thank you for the detailed response. I shall be installing the apc linux s/w
later today.

(I just didnt want to start mucking with the command line if the little blue
box had some script already)

Makes perfect sense now, cheers.

Regards

Matt Brown