[cobalt-users] RE: Problem with disbanding RaQ4 (StaQware)

["Horst" <hhoffmann@xxxxxxx>]

What you could try to disband the cluster:

go to /etc/cobalt there is a file named ha-config. Make a copy so you can
replace the edited File with the original. Edit the following parameters in
the file like this, but leave the others unchanged:

MACH2_PRI_MAC=FF:FF:FF:FF:FF:FF
MACH2_PRI_IP=127.0.0.1
MACH1_SEC_IP=127.0.0.1
MACH2_SEC_IP=127.0.0.1

After you wrote back the file, go to the GUI and see what the clusterstatus
is. It should be unconfigured. Now try to configure it again. It may works.
If not, replace the edited file with the original. There should be no reboot
necessary.

I´m not sure it works, so be careful.

Horst Hoffmann