RE: [cobalt-users] question

["[C] Paulick, Jim" <jpaulick@xxxxxxx>]

thanks so much.

I bit the bullet though, and ripped out the harddrive...  since it's only one file that's flubbed up, I didn't want to lose my entire file system with all the changes that i've been working on.

thanks again.

-jim


-----Original Message-----
From: Roy A. Urick [mailto:roy.urick@xxxxxxxxxxxxxxxx]
Sent: Monday, December 31, 2001 1:04 PM
To: cobalt-users@xxxxxxxxxxxxxxx
Subject: Re: [cobalt-users] question


Piece of cake. obtain a restore cd (buy one or burn via an ISO) boota pc
with a nic with that new bootable disk. This creates a system capable of
providing a remote boot location for your cobalt. connect that PC directly
to the cobalt with a crossover cable.

Boot the raq while holding down the S button(??? the instructions are on the
PC screen). when it prompts, boot from network, and you are all set. (the
screen on the PC will have the more detailed instructions after if boots of
the CD. The Raq will automagically rebuild itself.



----- Original Message -----
From: "[C] Paulick, Jim" <jpaulick@xxxxxxx>
To: <cobalt-users@xxxxxxxxxxxxxxx>
Sent: Monday, December 31, 2001 11:40 AM
Subject: [cobalt-users] question


> if one were to completely mess up the root file system.... how would one
use the restore disk when there is no cd-rom, nor floppy drive on  the RaQ4?
>
> I also don't have the option of removing the harddisk and mounting it on a
working machine and making the change that I need to make.
>
> (this happened because I accidentally corrupted libc.so.6)  so it's just
one file that I need to fix..
>
>
> any suggestions on restoration?
>
> note: I can't boot at all of course...
>
> can I mount on a temp fs?   I could do this with a normal server with a
floppy....but...
>
>
> -jim
>
> _______________________________________________
> cobalt-users mailing list
> cobalt-users@xxxxxxxxxxxxxxx
> To Subscribe or Unsubscribe, please go to:
> http://list.cobalt.com/mailman/listinfo/cobalt-users
>

_______________________________________________
cobalt-users mailing list
cobalt-users@xxxxxxxxxxxxxxx
To Subscribe or Unsubscribe, please go to:
http://list.cobalt.com/mailman/listinfo/cobalt-users