[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [cobalt-users] RAQ4 restore on a RAQ3i machine possible?
- Subject: Re: [cobalt-users] RAQ4 restore on a RAQ3i machine possible?
- From: Jeff Lasman <jblists@xxxxxxxxxxxxx>
- Date: Fri Dec 28 16:42:01 2001
- Organization: nobaloney.net
- List-id: Mailing list for users to share thoughts on Cobalt products. <cobalt-users.list.cobalt.com>
Mike Fritsch wrote:
> > No problem at all - you don't need to upgrade the processor you just
> > end up with a 300Mhz machine running RaQ4 software :-) FYI if you
> > have a later RaQ3 and you want to open the box you might be able to
> > add a hard drive on the second channel and restore it as a RaQ4R :-)
>
> Can you explain how you do that?
You get the piece of hardware you need to hold the hard disk (presumably
you can get these from Cobalt), mount the hard disk, and plug it in.
The RaQ4r restore disk notices two drives, and creates a software Raid
system.
Jeff
--
Jeff Lasman <jblists@xxxxxxxxxxxxx>
Linux and Cobalt/Sun/RaQ Consulting
nobaloney.net
P. O. Box 52672, Riverside, CA 92517
voice: (909) 778-9980 * fax: (702) 548-9484